LTC6242CGN#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC6242CGN#PBF is a CMOS single, rail-to-rail output, instrumentation amplifier with very low power consumption intended for use in applications for precision measurements. Its wide input dynamic range and low quiescent power make it ideally suited for low power analog signal conditioning. The LTC6242CGN#PBF is designed with low leakage and noise and offers excellent common-mode rejection and gain accuracy.

The LTC6242CGN#PBF instrumentation amplifier has a very low input bias current and offers a wide dynamic range. Its versatility and low power makes it ideal for precision measurements of low frequency signals in laboratory, industrial and consumer electronics applications. Applications include audio and thermocouple conditioners, strain gauge readers, data acquisition amplifiers, bridge circuits, and low frequency detectors.

The LTC6242CGN#PBF device consists of two input amplifiers, a precision gain set resistor, and two output buffers capable of driving loads up to 200 mA. The two gain setting resistors are used to provide a precision gain of 1, 2, or 10. The input common mode range includes both the positive and negative power supply rails. The outputs are rail-to-rail and can swing to within a few millivolts of either power supply rail. The slew rate of the device is 10 V/μs and the maximum output swing is 1.65V peak-to-peak.

The LTC6242CGN#PBF is specified over an operating temperature range of –40°C to +85°C and is available in an 8-lead plastic small outline package (SOIC). The device is designed to keep power consumption to a minimum, consuming only 3mW at 5V. The current draw can be varied for different power settings. The low quiescent current of 10 μA helps reduce power consumption even at low output levels.

The LTC6242CGN#PBF provides a very low input bias current of 10 pA, making it ideal for precision measurements of low frequency signals. The high input impedance and low output impedance of the device provide excellent common mode rejection. The flexible gain settings allow the user to easily adjust the gain to any desired level and the output buffers, capable of driving up to 200mA, provide ample drive strength.

The LTC6242CGN#PBF instrumentation amplifier is a cost-effective solution for low power, low bandwidth analog signal conditioning applications. Its wide input dynamic range, low power consumption and wide gain settings make it ideal for applications in industrial and consumer electronics, data acquisition amplifiers, bridge circuits, low frequency detectors and audio and thermocouple conditioners.

The specific data is subject to PDF, and the above content is for reference