LTC6930IDCB-7.37

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC6930IDCB-7.37 is an ultralow power CMOS programmable timer/oscillator specifically designed to provide high performance clock-generation at low supply voltages. It is ideal for use in applications wishing to reduce overall power consumption. The device is fully programmable down to 1.2V, allowing for a wide range of clock speeds for different applications. It contains an integrated crystal oscillator, frequency synthesizer, and precision frequency divider circuits for flexible frequency control.

The LTC6930IDCB-7.37 can be programmed as either a clock oscillator or a timer. As a clock oscillator, it generates a sinusoidal waveform at a programmed frequency that can be used to drive other clocks. As a timer it generates a periodic pulse at a programmed interval. This pulse can be used to time the actions of other devices. The frequency of the clock or timer can be programmed through software or hard-coded with the configuration pins.

The LTC6930IDCB-7.37 is divided into four operating blocks. The first block is the Oscillator/Phase Lock Loop (PLL). It is responsible for generating a clock signal of precise frequency. It uses a programmable reference frequency and a divide mode to generate the precise frequency. The second block is the Programmable Fractional Divider (FD). This block is responsible for dividing the reference frequency by a set programmable ratio. It is used to further adjust the output frequency of the PLL to achieve precise clock frequencies.

The third block is the Programmable Dividers (PD). It is responsible for dividing the output frequency by a ratio selected through software or by the configuration pins. This block is useful for deriving lower frequencies from the PLL\'s output. Finally, the fourth block is the Comparator. It is responsible for producing a low-jitter signal pulse of precise width and frequency, which can be used for timing or triggering other system components.

The LTC6930IDCB-7.37 is designed for low-power applications where long battery life and precise frequency control are necessary. It is suitable for use in remote control systems, medical, IoT, mobile and other applications requiring precise frequency control. Its small size and low power consumption make it perfect for portable applications. With its flexible configuration and integrated features, the LTC6930IDCB-7.37 is a versatile and cost-effective solution for a variety of clock and timing applications.

The specific data is subject to PDF, and the above content is for reference