LTC6957IMS-3#TRPBF Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC6957IMS-3#TRPBF is an ultra-low voltage zero-delay clock buffer designed to distribute high-frequency or high-speed clock signals. This zero-delay buffer has a typical propagation delay of less than 100ps and typical duty cycle of 0.5%. In addition, the LTC6957IMS-3#TRPBF provides a jitter profile that is rated at 15ps RMS over a wide frequency operating range, making it one of the best-performing zero-delay buffers on the market. The device draws only 4mA of supply current and is capable of working with a wide voltage range from 1.8V to 3.6V.

The LTC6957IMS-3#TRPBF is suitable for use in applications such as: cellphones, high-end PDAs, personal digital assistants, telecom, automotive, and medical applications. The buffer can be used in systems such as high-frequency clock generation, clock distribution and timing controllers. It can also be used in systems such as test and measurement, networking and communications, security and surveillance systems, audio and video systems. It is designed to provide clock distribution with minimal jitter and low power consumption.

The LTC6957IMS-3#TRPBF consists of three differential clock inputs and three differential clock outputs. The input and output differential pairs are terminated through channels 1, 2, and 3. The first differential clock pair is connected to channel 1, the second differential clock pair is connected to channel 2, and the third differential pair is connected to channel 3. Each channel can be attenuated using external resistors to reduce ringing and ensure that output levels remain within tolerance. Each channel also has its own output enable, so the output of each channel can be disabled independently. The output enable of each channel can be driven by a logic signal, allowing the output to be enabled or disabled as required. The enable signal can also be used to enable a power-down mode, where the output of the channel is powered down and the clock outputs will be terminated to ground.

The LTC6957IMS-3#TRPBF also features integrated loopback mode. This feature allows for testing of the buffer or checking for proper functionality. The loopback mode is enabled by driving the loopback input with a logic signal. When the loopback mode is enabled, the differential output will be connected to the differential input, allowing for testing or verification of proper functionality. The buffer also features a dynamic power down mode which is enabled when the power down input is driven with a logic signal. When enabled, the buffer will go into a low-power state and the output will be terminated to ground.

The LTC6957IMS-3#TRPBF is an ideal clock buffer for applications requiring zero-delay clock distribution, low jitter, and low power consumption. It is capable of providing a maximum clock output frequency of up to 630MHz, supports a wide voltage range of 1.8V to 3.6V, and provides a typical propagation delay of less than 100ps. In addition, the integrated loopback and power down modes offer additional flexibility and ease of use. The LTC6957IMS-3#TRPBF is an ideal choice for high-speed clock applications in areas such as cellphones, personal digital assistants, automotive, and medical.

The specific data is subject to PDF, and the above content is for reference