LTP5902IPC-IPMA#PBF

Serial Interfaces:	SPI, UART
Base Part Number:	LTP5902
Package / Case:	Module
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Current - Transmitting:	5.4mA ~ 9.7mA
Current - Receiving:	4.5mA
Voltage - Supply:	2.1 V ~ 3.76 V
Memory Size:	512kB Flash, 72kB SRAM
Utilized IC / Part:	--
Antenna Type:	Not Included, MMCX
Series:	SmartMesh® IP
Sensitivity:	-95dBm
Power - Output:	8dBm
Data Rate:	250kbps
Frequency:	2.4GHz
Modulation:	DSSS
Protocol:	Smartmesh IP™, 6LoWPAN
RF Family/Standard:	802.15.4
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Transceiver Modules: LTP5902IPC-IPMA#PBF Application Field and Working Principle

The LTP5902IPC-IPMA#PBF is a type of RF transceiver module with a wide-bandwidth and high performance. It is typically used in LAN/WAN installations for high speed wireless communication. Its small size and low power requirement make it a popular choice for a variety of applications. The module is a two-chip design consisting of an RF radio and a baseband processor combined in a single package, and housed in a shielded package.

Application Field of LTP5902IPC-IPMA#PBF

The LTP5902IPC-IPMA#PBF is primarily used in wireless communication systems for Ethernet or Wi-Fi applications. It supports the IEEE 802.11b/g/n standard and is backward compatible with earlier IEEE 802.11 versions. It is typically used in outdoor WLAN or cellular backhaul applications. It can be used in applications such as Wi-Fi access points, IP cameras, or other embedded devices where a high-speed connection is needed. It is also used in other communication systems such as wireless HDTV or wireless Internet for indoor applications.

Working Principle of LTP5902IPC-IPMA#PBF

The LTP5902IPC-IPMA#PBF works by using a dual-mode radio transceiver to support both 2.4 GHz and 5.0 GHz transmissions. The radio transceiver is designed to support all the basic parameters of IEEE 802.11b/g/n, allowing for a wide-area coverage and a reliable connection. It features a power saving solution, allowing for reduced power consumption while in idle mode or when transmitting low-power indication signals.The baseband processor provides baseband signal processing for the RF radio and is used in conjunction with the radio transceiver to achieve a high-speed, low-power connection with a supported network device. The baseband processor supports multiple power management modes to reduce power consumption when the device is not in use. The two-chip design combines the RF radio and the baseband processor into a single package to reduce complexity and cost.

Conclusion

The LTP5902IPC-IPMA#PBF is a type of RF transceiver module designed for a wide range of networked applications. Its small size and low power requirement make it an ideal choice for embedded devices and wireless communication systems, particularly in outdoor and WLAN applications. It supports the IEEE 802.11b/g/n standard and its dual-mode radio transceiver combined with a powerful baseband processor make it a reliable and cost-effective solution.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description