LW010A84

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC to DC converters are used to increase or lower the voltage level in a power supply, usually to allow a device to operate over a larger or more flexible voltage range. The term “DC-DC Converter” can refer to either a type of bridge rectifier or a type of voltage regulator. The LW010A84 is a DC to DC converter which typically provides a very high efficiency and power density. This type of converter is especially useful in applications where a small amount of power is needed but minimal power loss is a key consideration. In this article, we’ll cover the features and operating principles of the LW010A84.

The LW010A84 is advertised as being able to operate with up to 84V input and is rated at 85-264V. This type of input range makes the LW010A84 suitable for a wide variety of applications, from industrial and medical equipment to off-grid solar systems. It can provide a wide range of output voltages, from 0.6V up to 32V, and is capable of doing this while maintaining high efficiency. The power efficiency of this converter ranges from 90-95% depending on the input and output voltages.

The operating frequency for the LW010A84 is typically in the range of 150Khz, although the exact frequency can be adjusted by changing the external components. The operating frequency is important to determine the power supply’s EMI performance. The converter uses synchronous rectification and has adjustable overtemperature protection to enhance the lifespan of the components.

The LW010A84 is also capable of helping reduce the effects of power supply ripple, which is a type of voltage fluctuation caused by AC to DC conversion. The ripple is typically 50mVpp or less. The LW010A84 uses pulse-width modulation (PWM) to control the output voltage, which also helps reduce the ripple effects. It also provides short-circuit protection to prevent damage to the converter from sudden changes in the load or a short circuit.

The mechanism used by the LW010A84 to regulate the output voltage is a buck-boost mode. In this type of adjustable power supply, the output voltage is higher than the input voltage at low load or no load, and is lower than the input voltage at high load. The converter senses the incoming input voltage and regulates the output voltage to match the desired value. This is done by switching the input voltage on and off with a fixed duty cycle. The regulation of the output voltage is achieved by trading off the power throughput and the time unused during the switching operation.

The LW010A84 also supports a wide range of remote sensing, trimming, and programming settings using external pins. This allows for the output voltage of the converter to be adjusted to precise values in various applications. The support for remote sensing also helps with the faster load transient response.

The LW010A84 is a very efficient and versatile DC to DC converter which can be used in a wide variety of applications. From medical equipment to off-grid solar systems, the flexible input and output ranges make this converter suitable for a wide variety of uses. Its high efficiency is beneficial for applications where power loss should be minimal, and the pulse width modulation control helps reduce power supply ripple. Additionally, the wide range of remote sensing and programming features provide flexibility and customization for the output voltage. This makes the LW010A84 an ideal choice for many power-related projects.

The specific data is subject to PDF, and the above content is for reference