Allicdata Part #: | LX5602LQ-ND |
Manufacturer Part#: |
LX5602LQ |
Price: | $ 0.44 |
Product Category: | RF/IF and RFID |
Manufacturer: | Microsemi Corporation |
Short Description: | WIRELESS LAN FRONT-END MODULE |
More Detail: | RF Front End |
DataSheet: | LX5602LQ Datasheet/PDF |
Quantity: | 1000 |
1191 +: | $ 0.40087 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The LX5602LQ is a RF Front End (LNA + PA) designed for general-purpose applications. It is a highly integrated solution for wireless communication receivers, combining a low-noise amplifier (LNA) and a power amplifier (PA), equipped with a selection of different control methods and many other features. The integrated design of the LX5602LQ is fully compliant with the rigorous requirements of modern wireless communication systems.
Features
- Small form factor
- Integrated low-noise amplifier and power amplifier
- High linearity
- High efficiency
- Wide frequency range
- High gain
- Low power consumption
Applications
The LX5602LQ is suitable for a number of applications, including wireless communication receivers with multiple functions, such as cellular phones, LTE, Wi-Fi, and other digital cellular communicational systems. The LX5602LQ can also be used in a variety of other applications, such as Bluetooth, GPS, microwave radio, and automotive electronics.
Working principle
The LX5602LQ consists of two parts: the LNA and the PA. The LNA is designed to amplify a low-level signal, while the PA is designed to convert a low-level signal to a higher power output level. In order to achieve the desired RF performance, both components must be properly matched and tuned.
The LNA converts the incoming signal from the antenna and amplifies it before signal processing. The LNA is designed to minimize the noise floor, increase the signal-to-noise ratio, and reduce the effect of interference. The LNA is commonly used to improve the sensitivity and selectivity of a wireless communication system and to reduce the signal losses in high interference environments.
The PA is designed to increase the power level of the incoming signal to a higher level. The PA is usually designed to provide low distortion and linearity. It is also designed to provide a stable output power level over a wide frequency range. This high linearity and stability enables the PA to handle high data rate transmissions with minimal distortion.
The LX5602LQ is equipped with a selection of different control methods, such as temperature compensation, voltage stabilization, power detection and linearization, and dynamic gain control. These control methods are designed to ensure that the LNA and PA will achieve the desired performance.
Conclusion
The LX5602LQ is a highly integrated RF Front End (LNA+PA) designed for general-purpose applications. It is suitable for a variety of applications, including wireless communication receivers with multiple functions, such as cellular phones, LTE, Wi-Fi, and other digital cellular communicational systems. The LX5602LQ features small form factor, high linearity, high gain, efficiency, and wide frequency range. The integrated design of the LX5602LQ is fully compliant with the rigorous requirements of modern wireless communication systems.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
LX5602LQ-TR | Microsemi Co... | 0.41 $ | 1000 | WIRELESS LAN FRONT-END MO... |
LX5602LQ | Microsemi Co... | 0.44 $ | 1000 | WIRELESS LAN FRONT-END MO... |
LX5601L | Microsemi Co... | 0.92 $ | 1000 | WIRELESS LAN FRONT-END MO... |
IC FRONT END MOD 5GHZ WLAN 16QFNRF Front...
MOD TRANSMIT FRONT END 34MCMRF Front End
IC TRANSMITTER/RECEIVER 30MCMRF Front En...
IC RF 802.11B G N2GHZ TX RXRF Front End
IC FEM 2.4GHZ BT 256 QAM 16QFNRF Front E...
MOD FEM 5G PA+LNA+SP2T 16QFNRF Front End...