LXV200-105S

LED Drivers

LXV200-105S is a type of LED driver, which is used in lighting applications. It is a two output driver, which allows the user to control two different LED circuits with one board. The driver is also able to be dimmable with a 0-10V dimmer control signal. Its two output channels support a total of 12V DC output, or can be used to drive two separately 12V strings of LEDs. The maximum output power is 105 W. The LED driver is suitable for a wide range of applications, such as street lighting, covered area lighting and public buildings, etc.

The LXV200-105S LED driver has a working principle which involves the following components:

• An input voltage of either DC 24V or DC 48V and a constant voltage output of 12V.
• A voltage regulation circuit, which enables the driver to have a stable output voltage, with less than 1% variation, even in the presence of considerable input voltage fluctuations.
• A current regulation MOSFET switch, which acts like a switch activated by a control signal to set the current at the output of the driver.
• A hot swap control circuit, which enables the driver to be connected and disconnected from the LED source without affecting the output voltage.
• A frequency control circuit which allows for the frequency of the driver to be adjusted depending on the frequency of the LED source.

The working of the LXV200-105S driver boils down to its ability to receive an input voltage and convert it into output voltages that are suitable for powering LEDs. The voltage regulation circuit helps to keep the output voltage stable by efficiently regulating the current flowing through the LED. In addition, the driver also has a current regulation MOSFET switch which enables the user to adjust the current that is sent to the LED. By adjusting the current, the user can control the brightness of the LED. The hot swap control circuit allows the user to disconnect and reconnect the LED driver with the LED source without affecting the output voltage.

The frequency control circuit also allows the user to control how fast the driver operates in order to match the speed of the LED source. By controlling the frequency, the user can change the amount of power sent to the LEDs. This is useful for dimming the LEDs or reducing energy consumption.

In conclusion, the LXV200-105S LED driver has been designed to meet the needs of lighting applications. Its two output channels allow the user to control two different LED circuits with one board. The driver is able to provide a stable output voltage, even in the presence of considerable input voltage fluctuations. In addition, the driver is dimmable with a 0-10V dimmer control signal and has a current regulation MOSFET switch for controlling the brightness of the LEDs. With its hot swap control circuit and frequency control circuit, the driver can be used for a wide range of applications such as street lighting, covered area lighting and public buildings, etc.