M1033-16-155.5200

Series:	--
Packaging:	Tube
Part Status:	Obsolete
PLL:	Yes
Input:	LVCMOS, LVDS, LVPECL, LVTTL
Output:	LVPECL
Number of Circuits:	1
Ratio - Input:Output:	2:1
Differential - Input:Output:	Yes/Yes
Frequency - Max:	155.52MHz
Divider/Multiplier:	Yes/No
Voltage - Supply:	3.135 V ~ 3.465 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Surface Mount
Package / Case:	36-CLCC
Supplier Device Package:	36-CLCC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The M1033-16-155.5200 is an integrated circuit (IC) used in Clock/Timing applications. It is a voltage-controlled oscillator (VCO) and phase-locked loop (PLL) frequency synthesizer, providing both low phase noise and high frequency stability in a single chip. The M1033-16-155.5200 is designed to be used as a transmitter local oscillator (LO) or receiver local oscillator (RO) in high-end clock/timing applications such as Satcom or other high-frequency systems. In addition, the M1033-16-155.5200 can also be used as the clock source for Digital Signal Processing (DSP) applications.

Application Field and Working Principle

The M1033-16-155.5200 is an integrated PLL frequency synthesizer for multiple-clock applications. It is especially suited for frequency synthesizers and clock sources used in Satcom and other high-frequency systems. The M1033-16-155.5200 IC provides both a low phase noise and a high frequency stability with low power consumption, making it ideal for Satcom and other high-frequency systems.The M1033-16-155.5200 is designed to be used in multiple-clock applications, such as Satcom, where multiple clocks are required. The chip is designed to provide a number of clock sources that can be configured to different frequencies while providing low phase noise and high frequency stability. The chip also offers a high degree of flexibility in the frequency range with a wide range of programmable dividers, and a wide range of output signal formats.The M1033-16-155.5200 is a voltage-controlled oscillator (VCO). The VCO is the key part of the PLL frequency synthesizer, and it is used to provide a signal with a known frequency. The VCO is controlled by an external voltage signal, which is used to adjust the output frequency. The VCO also provides a feedback signal to the PLL loop. This feedback signal is compared with the reference signal from the frequency input. If the reference signal does not match the output signal from the VCO, the PLL will adjust the voltage signal to the VCO, until the output frequency matches the desired frequency.The M1033-16-155.5200 also contains a Phase Detector, which is used to compare the reference signal with the signal from the VCO. The Phase Detector is used to adjust the voltage signal to the VCO to ensure that the desired frequency is achieved. Finally, the chip also contains the necessary components for a Charge Pump circuit, which is used to control the voltage level of the reference signal and to ensure that the output from the VCO is stable and accurate. The M1033-16-155.5200 is a low noise, low power consumption PLL frequency synthesizer, which offers a high degree of flexibility and reliability, making it ideal for Satcom and other high-frequency systems. It is capable of providing a low phase noise and high frequency stability while still being cost efficient.

Conclusion

The M1033-16-155.5200 is an ideal solution for applications that require multiple clocks with low phase noise and high frequency stability, such as Satcom or other high-frequency systems. The chip provides a low power consumption, high degree of flexibility, and reliability thanks to its voltage-controlled oscillator (VCO), Phase Detector, and Charge Pump circuits. This makes the M1033-16-155.5200 a great choice for use in clock/timing applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description