Allicdata Part #: | M18-LD0035-A-M-PN-J-ND |
Manufacturer Part#: |
M18-LD0035-A-M-PN-J |
Price: | $ 164.34 |
Product Category: | Sensors, Transducers |
Manufacturer: | Panasonic Industrial Automation Sales |
Short Description: | SENSOR LASER 350MM PNP 10-30VDC |
More Detail: | Optical Sensor Reflective 13.780" (350mm) Cylinder... |
DataSheet: | M18-LD0035-A-M-PN-J Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 149.39800 |
Series: | M18-L |
Part Status: | Active |
Sensing Distance: | 13.780" (350mm) |
Sensing Method: | Reflective |
Output Configuration: | PNP |
Mounting Type: | -- |
Voltage - Supply: | 10 V ~ 30 V |
Response Time: | 333µs |
Operating Temperature: | -10°C ~ 50°C (TA) |
Package / Case: | Cylinder, Threaded - M18 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
M18-LD0035-A-M-PN-J (hereafter referred to as "the sensor") is an optical sensor, specifically a photointerrupter, that is used to detect the presence of objects in a particular area. This sensor is of the Slot Type variety, meaning that it is designed to detect the presence of objects that travel along a track or within a slot. It is further classified as a Logic Output device, meaning that it produces either a high or a low signal, depending on the state of the object being sensed. This makes it well suited for use in digital applications, such as those that rely on detection of presence or absence, e.g. proximity sensing.
The sensor itself is a small, rectangular device measuring 18.4mm by 7mm. It contains an LED light source and an opposing photodetector that can detect the presence or absence of the object. When an object travels into the sensor, it interrupts the light beam, causing the detector to output a signal. The signal can be either high or low, depending on the design of the sensor, the type of object being detected, and how it interacts with the sensor\'s components.
The M18-LD0035-A-M-PN-J sensor is designed to be used in a variety of applications, such as motor control, proximity sensing, and machine automation. It is particularly well suited for applications where precise, digital signals are required to ensure operation accuracy. It can be used to sense the presence of a wide range of objects, including cars, humans, and other moving objects. It is also highly reliable, with a consistent and reliable signal output. Finally, it can be used in a variety of environments, including wet, dusty, and/or hot locations.
In terms of the sensor\'s working principle, it is based on the interruption of a light beam by an object. As mentioned above, the sensor consists of an LED light source and an opposing photodetector. When an object travels into the sensor, it interrupts the light beam, causing the detector to output a signal. This signal can then be used to trigger an event, such as the activation of a motor or the manipulation of a machine. The signal has two states, high and low, depending on how the object interacts with the sensor.
In conclusion, the M18-LD0035-A-M-PN-J optical sensor is an excellent choice for applications that require a high degree of accuracy and reliability. It is a Logic Output device that is designed to detect the presence or absence of an object based on the interruption of a light beam. It is highly reliable, and can be used in a variety of environments. Ultimately, the sensor is an ideal choice for applications that require precise digital signals.
The specific data is subject to PDF, and the above content is for reference
SENSOR TRANS OPAQUE OPTOSCHMITTOptical S...
SWITCH SLOTTED OPT W/WIRE LEADSOptical S...
SWITCH PHOTOLOGIC OPTICAL FLAGOptical Se...
SENSOR 56CH 10MM 24VDC NPNOptical Sensor...
PHOTOINTERUPTER TRANSMISSIVEOptical Sens...
OPTO SENSOR SLOT TYPE 3.6MMOptical Senso...