Allicdata Part #: | M18-LD0035-A-P-J-ND |
Manufacturer Part#: |
M18-LD0035-A-P-J |
Price: | $ 152.40 |
Product Category: | Sensors, Transducers |
Manufacturer: | Panasonic Industrial Automation Sales |
Short Description: | SENSOR LASER 350MM NPN 10-30VDC |
More Detail: | Optical Sensor Reflective 13.780" (350mm) Cylinder... |
DataSheet: | M18-LD0035-A-P-J Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 138.55000 |
Series: | M18-L |
Part Status: | Active |
Sensing Distance: | 13.780" (350mm) |
Sensing Method: | Reflective |
Output Configuration: | NPN |
Mounting Type: | -- |
Voltage - Supply: | 10 V ~ 30 V |
Response Time: | 333µs |
Operating Temperature: | -10°C ~ 50°C (TA) |
Package / Case: | Cylinder, Threaded - M18 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optical Sensors, or photodetectors, are used in a wide variety of applications, from controlling industrial processes to detecting biological activity in organisms. Photointerrupters, also known as slot type photodetectors, are an important application of optical sensing. The M18-LD0035-A-P-J model is a type of photointerrupter logic output, and is used widely in industrial and consumer electronics applications.
A photointerrupter consists of an emitter and a receiver. The receiver is typically composed of a light sensitive component, such as a photodiode or a phototransistor. The emitter is typically an infrared LED, and is used to produce a beam of light that the receiver can detect. When an object passes through the beam of light, the light is then blocked, and the receiver detects this and produces an output.
In the case of the M18-LD0035-A-P-J, this photointerrupter has a built-in logic output, which can be used to trigger an event or action in a circuit when triggered. The logic output can be either a high or low signal, depending on the type of photointerrupter used. The logic output can also be configured to be active low or active high.
The M18-LD0035-A-P-J works by using an infrared LED as the emitter, and a phototransistor as the receiver. The emitter is typically positioned at the center of the slot in the photointerrupter, while the receiver is positioned at the end. As an object passes through the slot, it blocks the infrared beam of light from reaching the receiver, and the output of the receiver is changed accordingly. Depending on the settings of the logic output, this can cause an event or action to be triggered.
The M18-LD0035-A-P-J photointerrupter has a wide range of applications. It is commonly used as a contactless switch in consumer electronics, such as gaming systems. It is also used to detect presence or movement in industrial automation, as well as in robotics. In addition, this photointerrupter can be used to sense the opening and closing of a door or window, as the slot in the device can be placed in the door frame and the movement of the door will block the light beam.
The M18-LD0035-A-P-J photointerrupter has proven to be a reliable and versatile sensing option for various applications. Its built-in logic output makes it even more practical, as it requires only a basic setup and can be used for a variety of tasks.
The specific data is subject to PDF, and the above content is for reference
SENSOR TRANS OPAQUE OPTOSCHMITTOptical S...
SWITCH SLOTTED OPT W/WIRE LEADSOptical S...
SWITCH PHOTOLOGIC OPTICAL FLAGOptical Se...
SENSOR 56CH 10MM 24VDC NPNOptical Sensor...
PHOTOINTERUPTER TRANSMISSIVEOptical Sens...
OPTO SENSOR SLOT TYPE 3.6MMOptical Senso...