M2012TZW23/UC-JB

Rocker Switches

Rocker switches are devices that control on/off or momentary operations of a circuit. This type of switch is typically seen on audio systems, such as amplifiers, or consumer electronics, such as TV sets and DVD players. The rocker switch is a two part device, consisting of an actuator and a contact assembly. The actuator is normally configured in what is called an SPST or single-pole-single-throw configuration. This means that it is electrically connected to a single contact point when pressed. The contact assembly consists of a normally-open contact point which is connected to one terminal and a normally-closed contact point which is connected to the opposite terminal.

The M2012TZW23/UC-JB type of rocker switch has four terminals, two input and two output. This type of switch is used in equipment with higher current and voltage ratings, such as industrial levels and in automobiles. It is important to know how the switch works in these applications, as incorrect wiring could lead to dangerous situations. The working principle of the M2012TZW23/UC-JB rocker switch is quite simple. When the actuator is pressed, the two input contacts are connected and the current flows between them. The power then flows through the two output contacts to the external device. This type of switch is often used in applications where high current loads are required, such as in industrial machinery, as it can control higher currents more reliably than other types of switch.

The M2012TZW23/UC-JB rocker switch is typically used in applications necessitating the switching of both current and voltage. Examples include the lighting of lamps, motors, compressors and pumps. In addition, this type of switch is also often used in industrial equipment and motor controllers. Its construction is designed to reduce electrical noise in highly sensitive equipment. Additionally, it has an environmental seal which prevents dust or water ingress when used in outdoor or wet environments. The M2012TZW23/UC-JB rocker switch also has a low contact resistance which improves current flow and reduces contact bounce times.

the M2012TZW23/UC-JB rocker switch is a reliable device for controlling the on/off or momentary operations of electrical circuits. It is constructed to reduce electrical noise and provide a solid environmental seal to withstand dust and water. Its construction also ensures a low contact resistance, allowing high currents to switch quickly. The switch’s four terminals allow it to be used in industrial settings with high current and voltage ratings and are used in such applications as motor controllers, pumps, and compressors.