M24128-BWMN6TP Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory

The M24128-BWMN6TP is an 8K-bit Serial I²C Bus EEPROM memory. It consists of a 256 x 32 array of bits and is made up of four integrated circuits. This type of memory is commonly used in consumer and industrial applications, such as the storage of data from various devices. It is also used in embedded systems and in certain types of computer memory.

The M24128-BWMN6TP has a four-byte organization, which means it can store up to 4095 bytes of data. The four-byte organization is divided into two sections: an address section and a data section. The address section contains the pointer to the location of the data in the memory and the data section contains the actual data. The memory also contains four control bytes that allow it to control the operations carried out on the memory, such as reading and writing.

The M24128-BWMN6TP has a low power consumption of 0.5mA and a standby current of 0.1mA. The power supply voltage can range from 2.7V to 6.5V. The memory is available in different packages, including SO-8, TSSOP-8, DIP-8 and QFP-48. The memory is also available in various versions, such as 6-pin, 8-pin and 9-pin.

The M24128-BWMN6TP uses the I²C bus protocol for communication. This protocol is a two-wire serial bus that requires only two connections for communication. One connection is the data line (SDA) and the other connection is the clock line (SCL). The I²C protocol allows multiple devices to be connected on the same I²C bus. The data is transmitted and received in 8-bit or 16-bit word lengths.

The M24128-BWMN6TP is mainly used in the industrial and commercial fields, such as sensing and measuring systems, alarm systems, and commercial inventory control systems. It is also used in home appliances, HVAC systems, robotics, and other applications that require the storage of data.

The M24128-BWMN6TP has an on-chip logic circuit that allows read and write operations without the need for an external programming device. The memory has various write protection modes, such as Sequential Programming and Block Erase Protection. The memory can also be protected from accidental write operations by using password protection.

The working principle of the M24128-BWMN6TP is based on a two-wire serial communication protocol. The two connections are the data line and the clock line. The memory can be addressed by a master controller, which sends instructions for read and write operations. The memory receives the instructions and carries out the required operations. The master controller can also send requests for data, such as the write protection mode and the temperature and voltage levels. The master controller can also set parameters for the memory, such as the size of the data stored and readout rates.

In conclusion, the M24128-BWMN6TP is an 8K-bit Serial I²C Bus EEPROM memory that is commonly used in industrial and commercial applications. It uses the I²C bus protocol for communication and has an on-chip logic circuit that allows read and write operations. The memory has various write protection modes and can be protected from accidental write operations by using a password. The working principle of the memory is based on a two-wire serial communication protocol.

The specific data is subject to PDF, and the above content is for reference