Allicdata Part #: | 1949-1050-ND |
Manufacturer Part#: |
M2640W1 |
Price: | $ 0.69 |
Product Category: | RF/IF and RFID |
Manufacturer: | L3 Narda-MITEQ |
Short Description: | WIDE IF BANDWIDTH |
More Detail: | RF Mixer IC General Purpose 26GHz ~ 40GHz Module |
DataSheet: | M2640W1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 0.63000 |
Series: | -- |
Part Status: | Active |
RF Type: | General Purpose |
Frequency: | 26GHz ~ 40GHz |
Number of Mixers: | 2 |
Gain: | -- |
Noise Figure: | 10.5dB |
Secondary Attributes: | -- |
Current - Supply: | -- |
Voltage - Supply: | -- |
Package / Case: | Module, SMA Connectors |
Supplier Device Package: | Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
.RF Mixers are essential devices in the electronics industry which have the capability of converting electrical signals between radio and intermediate frequencies. The M2640W1 is a device under the superheterodyne sub-category in the RF mixers family and it has a remarkable application field and working principle.
The M2640W1 is a double-balanced Gilbert cell mixer which allows RF signals to be received and transmitted, while converting them into an intermediate frequency or even plural frequencies. This RF mixer is ideally suited for wide frequency range applications in satellite communications, aerospace navigation or even radio broadcast reception. The wide bandwidth of M2640W1, which is 6:1, helps it accurately receive very slight signal changes, such as those due to atmospheric or other external noise. This makes it extremely useful for various kinds of remote sensing and electronic warfare.
From a technical perspective, the M2640W1 has an input impedance of 50 Ohms, input voltage of 5 V, linearity of 0.2 dB, and noise figure of 1.5 dB. It has RF port and IF port that works through Gilbert cell to form a double-balanced mix, enabling the mixer to switch multiple frequency bands swiftly. In addition to that, the noise figure is low and the nonlinear distortion is extremely low, helping to obtain stronger signals when working even in harsh electromagnetic environments.
The M2640W1 works according to a positive and negative Voltage Controlled Oscillator (VCO) scheme. This means that when signal energy is transmitted into the mixer’s VCO through the RF port, the frequency which is configured by the VCO is multiplied with the signal energy in order to return a higher frequency in the local oscillator’s output. This output is then multiplied with the RF input signal energy, resulting in a lower frequency shifted signal at the IF port output.
The M2640W1 is also designed to reduce the noise floors generated by noise figure via a pre-amplifier. This pre-amplifier is further amplified with a gain of approximately 20 dB for the purpose of better signal to noise ratio. Additionally, the M2640W1 is broadly powerful enough to receive and transmit frequencies between 300 MHz and 2600 MHz.
To summarise, the M2640W1 is one of the most advanced products in the RF mixers family due to its wide frequency range, low noise figure, and low nonlinear distortion. It is able to cover all kinds of applications spanning from satellite communication to radio broadcast reception. Furthermore, its VCO scheme and pre-amplification enable it to receive and transmit frequencies more accurately and powerfully in various electromagnetic environments.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
14PM-M264U | NMB Technolo... | 25.2 $ | 1000 | STEP MOTOR HYBRID UNIPOLA... |
M2640W1 | L3 Narda-MIT... | 0.69 $ | 1000 | WIDE IF BANDWIDTHRF Mixer... |
IC MMIC IQ MIXERRF Mixer IC VSAT Up Conv...
IC MIXER 2GHZ-14GHZ 12QFNRF Mixer IC Rad...
IC MMIC MIXER HI IP3 8-MSOPRF Mixer IC W...
IC MMIC IQ MIXER 24SMDRF Mixer IC Radar ...
IC DOWNCONVERTER PCS/UMTS 16QSOPRF Mixer...
IC MIXER 50-400MHZ UP CONV 6SMDRF Mixer ...