M37046G-12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Clock/Timing - Application Specific

The M37046G-12 is a general-purpose counter with 16-bit count resolution. It features a programmable prescaler, fast start/stop count, and multiple counting modes. The applications of the counter include high-accuracy analog to digital conversion and timing applications.

Features

• Wide operating temperature range from -40°C to +85°C
• Capable of up to 8 MHz counting speed
• Programmable prescaler allows for an even wider range of frequencies
• Programmable start/stop count and multiple counting modes

Working principle

The M37046G-12 counter operates by counting pulses that are applied at one of the three input ports. When the pulses are received, the counter begins incrementing or decrementing its value depending on the counting mode that is currently set. The counter is usually set to a certain count value before counting began, and when the counter reaches that value, it is reset to the starting count value again. The counters can also be set to count up or down depending on the application. The counter can be configured to operate in a number of different modes, and the mode it is operating in determines the functions of the pins.

One of the pins, the gate pin, is used to configure the counter to either stop or start counting. When the gate pin is set to "high", the clock begins counting, and when the gate pin is set to "low", the clock stops counting. The other two pins, the clock input and reset pin, are used to reset the count value and to provide the clock pulses used for counting. The clock input pin takes in the pulses to be counted, while the reset pin is used to reset the count value to the starting value.

The counter can also be programmed to count in one of several counting modes, including count-up, count-down, and frequency division modes. In the count-up and count-down modes, the counter counts either up or down until it reaches the maximum count value. In frequency division mode, the counter is programmed to count at a certain frequency, and the division between the internal and external clock frequencies is used to determine the count value. The prescaler can be programmed to adjust the division ratio, so that the counter can count at different frequencies.

Applications

The M37046G-12 counter is suitable for a wide range of applications. It is often used for timing, frequency division, and high-accuracy analog to digital conversion. It can also be used for flow measurement applications, data acquisition systems, and digital filtering.

The counter is also commonly used in automotive applications, as it is capable of measuring engine speed, engine load, fuel consumption, and other engine data. In addition, the M37046G-12 counter is often used in industrial automation, robots, and other industrial applications where precise timing is required.

Overall, the M37046G-12 counter is a versatile and precise counting device, which can be used in a variety of applications where precise timing or frequency division is needed. Its wide range of features make it an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference