M39003/01-3018/HSD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors, or tantalum electrolytic capacitors, are a type of electrolytic capacitor, a component for storing electrical charge. The capacitors have a wide range of applications and are often found in consumer electronics, automotive systems, and industrial settings. In this article, we\'ll take a deeper look into the specific application field and working principle of the M39003/01-3018/HSD tantalum capacitor.

This particular series of capacitors is primarily designed for military, aerospace, and commercial applications. With the help of its low equivalent series resistance (ESR) and high-volumetric efficiency, it is able to deliver higher capacitance values while keeping the size and weight small. Besides, the M39003/01-3018/HSD is specifically rated for operation in extreme environmental conditions.

The M39003/01-3018/HSD is a solid tantalum capacitor with a special electrolyte-filled casing. It is a radial-based device with three main terminals, including pin 1 (cathode), pin 2 (anode), and pin 3 (case).

In its simplest explanation, a capacitance is created when an electric charge is stored on one capacitor plate which creates a potential difference between the two plates. This difference is measured in Volts and is referred to as its capacitance. In the M39003/01-3018/HSD capacitor, this capacitance is created between its anode (pin 2) and cathode (pin 1) plates, while the case (pin 3) acts as a circuit\'s ground.

In order to charge the capacitor, a voltage is applied to the anode plate; then, due to the attraction between the anode and the potentionally-charged cathode plate, electrons flow through the electrode and accumulate on the cathode plate. At the same time, the electrolyte in the capacitor\'s casing helps facilitate the flow of electrons.

When the capacitor is discharging, the current moving in the opposite direction causes the capacitor\'s voltage to drop, moving the electrons from the cathode plate to the anode plate. The process is then repeated charging up and discharging the capacitor.

The charging and discharging process of the capacitor is essential for its application in many different areas. For instance, in power supplies and amplifiers, the M39003/01-3018/HSD capacitor is helpful in smoothing out the voltage fluctuations and filtering out any noise or interference.

The device is also used for energy storage in automotive and industrial applications. It can store a certain amount of energy which can be used as a backup, allowing the system to continue functioning in the event of a power outage. In consumer electronics, the M39003/01-3018/HSD capacitor is used for various tasks such as providing a more steady power supply, noise reduction, etc.

Overall, the M39003/01-3018/HSD tantalum capacitor fills many essential roles in a wide variety of applications, from commercial to military and aerospace. Not only is it a reliable and proven component, but also its rugged construction and superior performance in extreme environmental conditions give it a reliable edge over other types of capacitors.

The specific data is subject to PDF, and the above content is for reference