M39003/01-6118/HSD

Series:	Military, MIL-PRF-39003/1, CSR13
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	39µF
Tolerance:	±5%
Voltage - Rated:	35V
Type:	Hermetically Sealed
ESR (Equivalent Series Resistance):	--
Operating Temperature:	-55°C ~ 125°C
Lifetime @ Temp.:	--
Mounting Type:	Through Hole
Package / Case:	Axial
Size / Dimension:	0.351" Dia x 0.786" L (8.92mm x 19.96mm)
Height - Seated (Max):	--
Lead Spacing:	--
Manufacturer Size Code:	D
Features:	Military
Failure Rate:	B (0.1%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors: M39003/01-6118/HSD Application Field and Working Principle

Tantalum capacitors are a type of electrolytic capacitors commonly used in consumer electronics. They are used to store electrical energy and filter the signal in many electronic circuits. Tantalum capacitors have many advantages such as low leakage current, high frequency range and low series resistance. But the main characteristics are quick response, good insulation and high stability.The M39003/01-6118/HSD part number identifies a series of capacitors that are optimized for high frequency and high current applications. These devices are highly stable, with very low losses at high frequencies. They are also used in high frequency applications, such as cell phone and other communication equipment. In addition, these capacitors have low leakage and low series resistance.The core of the M39003/01-6118/HSD is a single solid tantalum chip, which is a formed to a specific size and shape. This chip is then evaporated with a conformal coating of dielectric material to create the capacitor. The dielectric material is then sintered to provide a high level of insulation to the capacitor.The most common form of tantalum capacitors are the SMD (Surface Mount Device) types. The SMD types are comprised of a tantalum chip that is dipped in molten manganese dioxide and then sealed with a conformal coating before final assembly. These devices are designed to be mounted directly on Printed Circuit Boards (PCB’s). SMD tantalum capacitors are also used for decoupling applications, such as noise reduction and high frequency signal smoothing. In these applications, the capacitor acts as a bridge between the power supply and the load. The capacitance of the capacitor is typically chosen based on the expected frequency of the load.Tantalum capacitors also have some disadvantages. One of them is that they can be relatively expensive and the cost can be quite high, depending on the size and type of capacitor. In addition, tantalum capacitors are sensitive to moisture and heat. High temperatures can cause them to become unstable, while moisture can cause them to short circuit. In conclusion, the M39003/01-6118/HSD series of capacitors are excellent for high frequency and high current applications, including communications and decoupling. They are highly stable with very low losses at high frequencies, have low leakage, and have low series resistance. However, they are relatively expensive and sensitive to both temperature and moisture. Overall, the M39003/01-6118/HSD series of capacitors are an excellent choice for many applications, especially high frequency and high current circuits. With proper application selection and care they will provide reliable operation for many years.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description