M39003/01-6275/HSD

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	B (0.1%)
Features:	Military
Manufacturer Size Code:	B
Lead Spacing:	--
Height - Seated (Max):	--
Size / Dimension:	0.185" Dia x 0.474" L (4.70mm x 12.04mm)
Package / Case:	Axial
Mounting Type:	Through Hole
Lifetime @ Temp.:	--
Series:	Military, MIL-PRF-39003/1, CSR13
ESR (Equivalent Series Resistance):	--
Type:	Hermetically Sealed
Voltage - Rated:	75V
Tolerance:	±10%
Capacitance:	1.8µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors: M39003/01-6275/HSD Application Field and Working Principle

Tantalum capacitors are one of the most widely used types of capacitors because of their wide range of applications, high energy density, and efficiency. They are used in a variety of electronic devices, from consumer electronics to industrial equipment. The M39003/01-6275/HSD is a specific type of tantalum capacitor, commonly used because of its small size and good endurance. This article will examine the application field and working principle of the M39003/01-6275/HSD. The M39003/01-6275/HSD is a type of High-Surge Dissipation (HSD) electrolytic capacitor. It is a surface-mount device with a metalized electrode, which has a high ripple current capacity and a low ESR. As such, it is particularly well suited for applications that require high current capacity and reliable performance. Because of its small size, the M39003/01-6275/HSD is well suited for automotive, medical, and military applications. It is also used in consumer electronics due to its low cost and high reliability. The M39003/01-6275/HSD is a polarized capacitor, meaning that it has two terminals – a positive and a negative. The positive terminal is typically connected to a voltage source, while the negative terminal is connected to ground. It is constructed with an anodized tantalum element, a manganese dioxide cathode material, and an epoxy resin encasement. The anodized element serves as the dielectric, providing insulation between the two electrodes. The manganese dioxide acts as the cathode material, providing a negative charge and allowing current to flow. The epoxy resin encases the entire device, protecting it from environmental elements such as dust and moisture. The working principle of the M39003/01-6275/HSD is that when a voltage is applied to the positive terminal, a current flows through the capacitor. This current causes electrons to flow from the negative terminal to the positive terminal, creating a potential energy difference. When the voltage is removed, the energy stored in the capacitor is released in the form of heat, allowing the capacitor to discharge.The M39003/01-6275/HSD can be used in applications requiring high-surge current capacity, such as in amplifiers and filters. In these applications, the capacitor is connected in parallel with the component being filtered. This allows the capacitor to absorb or “smooth out” any sharp voltage spikes, providing a steady current and voltage. It can also be used in applications requiring high ripple current capacity, such as in optical networks. Here, the capacitor provides a steady flow of current in order to protect laser diodes.In conclusion, the M39003/01-6275/HSD is a type of tantalum capacitor used in a variety of applications due to its small size and reliable performance. It is a polarized surface mount device, constructed with an anodized tantalum element, a manganese dioxide cathode material, and an epoxy resin encasement. The capacitor works by storing potential energy when voltage is applied and releasing it when the voltage is removed. The M39003/01-6275/HSD is well suited for applications requiring high-surge current capacity or high ripple current capacity.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description