M39003/01-7014/TR

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	C (0.01%)
Features:	Military
Manufacturer Size Code:	C
Lead Spacing:	--
Height - Seated (Max):	--
Size / Dimension:	0.289" Dia x 0.686" L (7.34mm x 17.42mm)
Package / Case:	Axial
Mounting Type:	Through Hole
Lifetime @ Temp.:	--
Series:	Military, MIL-PRF-39003/1, CSR13
ESR (Equivalent Series Resistance):	--
Type:	Hermetically Sealed
Voltage - Rated:	6V
Tolerance:	±5%
Capacitance:	180µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Tantalum capacitors, also known as tantalum electrolytic capacitors, are a type of polarized capacitor. Rather than entirely metal or plastic dielectrics, tantalum capacitors contain tantalum pentoxide, an electrically conductive chemical composition, and use this as the electrolyte between the capacitor terminals.These capacitors are widely used in electronics due to their superior performance characteristics, and often bear identification markings that denote their model number and capacitance value. The M39003/01-7014/TR is a common type of tantalum capacitor.

Application Field of M39003/01-7014/TR

The M39003/01-7014/TR is a surface-mount tantalum capacitor. This capacitor is suitable for use in a wide range of products, such as cellular phones, personal computers, and portable electronics. The M39003/01-7014/TR has a capacitance of 47 microfarads (μF) and a maximum working voltage of 16 volts (V). It is a high-performance capacitor, and is ideal for use where a high capacitance is required in a circuit that is working with low voltage.

Working Principle of M39003/01-7014/TR

How does the M39003/01-7014/TR capacitor work? A capacitor is a passive electronics component that stores and releases electrical energy when connected to a circuit. The M39003/01-7014/TR has two electrodes, a positive and a negative, that are connected to an electrolytic solution. When subjected to an electric field, the solution is polarized and charges are stored on it. This separation of charge is known as capacitance.The M39003/01-7014/TR capacitor is made out of a tantalum pentoxide dielectric material, which has a specific capacitance value. The dielectric material allows electrons to move freely, thus creating a polarization effect. Electrons then move between the capacitor\'s two electrodes, creating a charge that is stored in the capacitor.The M39003/01-7014/TR capacitor is rated at 47 μF and 16 V. When the voltage is applied to a circuit, the current flowing through the capacitor creates a potential difference between the two terminals of the capacitor, and this potential difference is what causes the charge to be stored in the capacitor. The amount of charge stored is a function of the capacitance and the voltage applied, and is known as the capacitance charging current. As long as the applied voltage does not exceed the recommended value for the capacitor, the capacitance charging current is a stable and consistent value.

Limitations of the M39003/01-7014/TR

Although the M39003/01-7014/TR capacitor has excellent performance characteristics, there are some limitations that should be taken into consideration. This type of capacitor is limited to a maximum operating voltage of 16V, and a peak reverse voltage of 14V. This means that the capacitor should not be used in circuits where the voltage applied is too high.Additionally, the M39003/01-7014/TR capacitor has a relatively low maximum temperature rating, meaning that it should not be operated in extremely hot environments. Additionally, the capacitor\'s maximum operating temperature is dependent on its ambient temperature, as the dielectric material used in this type of capacitor has a temperature coefficient that causes capacitance to decrease as temperature rises.Another limitation of the M39003/01-7014/TR capacitor is its maximum capacitance rating of 47 μF. This means that it is not recommended for use in circuits that require a high capacitance value. Additionally, the M39003/01-7014/TR capacitor is limited to a maximum pulse current of 5.5 amps, and a continuous DC current of 4 amps. This means that it should not be used in high-current circuits.

Conclusion

The M39003/01-7014/TR is a surface-mount tantalum capacitor that is ideal for use on low voltage, low-current circuits. Its capacitance is rated at 47 μF, and its maximum working voltage is 16 volts. However, it should not be used in circuits with high voltages or current levels, or with high temperatures, as its maximum temperature rating is relatively low. Additionally, its maximum capacitance value is not suitable for high-capacitance circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description