M39003/01-8012/HSD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are capacitor components made of tantalum as the anode. They are often used in medium- and high-voltage applications due to their relatively low cost and high capacitance. The M39003/01-8012/HSD is a tantalum capacitor typically employed in high-voltage directional surge suppression applications that require very stable capacitance.

The M39003/01-8012/HSD component consists of a tantalum anode and cathode which are connected together via two sets of electrodes. These electrodes are insulated from each other and the body of the capacitor by a thin layer of dielectric material. When a voltage is applied to the device, the dielectric material breaks down and forms a thin layer of conductive electrons. This layer of electrons allows current to flow between the electrodes which in turn triggers a positive or negative current flow through the capacitor.

The M39003/01-8012/HSD has a wide operating temperature range of -55°C to +105°C, making it suitable for a variety of applications. It offers a measurably higher capacitance than its predecessor, the M39003/01-8012/HSB. This higher capacitance allows it to handle higher power loads and suppress greater voltage spikes than the M39003/01-8012/HSB.

When used in surge suppression applications, the M39003/01-8012/HSD acts as a “shunt” device, shunting away or blocking high voltage spikes that could damage system components. The device has a rated peak current of 10A and a maximum peak current rating of 20A. This allows it to support relatively large voltage and power surges without significantly depleting the capacitor’s energy storage capacity.

The M39003/01-8012/HSD’s design also allows it to perform extremely efficiently when compared to alternative, ceramic-based devices. This device is designed to make full use of the energy stored in the capacitor during its operation, resulting in lower power losses and improved efficiency. Additionally, the device’s low-inductive design minimizes electrical interference, which reduces the potential for power disruption and eliminates the need for complex, space-consuming circuit boards.

The M39003/01-8012/HSD is a highly reliable device that is designed to offer maximum performance even in demanding environmental conditions. Its robust design ensures a long service life and the component was tested to withstand extremely high voltages of up to 2000V. The device also has an extremely low failure rate and is resistant to thermal fatigue.

In conclusion, the M39003/01-8012/HSD is an extremely effective device for providing surge suppression in high-voltage applications. Its low-cost construction, high capacitance, wide operating temperature range, and high reliability make it an ideal choice for high-voltage, directional surge protection applications.

The specific data is subject to PDF, and the above content is for reference