M39003/09-2035/TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are one of the most important electronic components with wide ranging applications in modern electronic products. The M39003/09-2035/TR is a sub-miniature size, tantalum capacitors that offer superior performance and reliability in space-constrained applications. The M39003/09-2035/TR comes in a variety of sizes ranging from 1 mm to 5 mm long, and is a hermetically sealed, solid-state device with an anode–cathode structure.

The M39003/09-2035/TR capacitors have several advantages over other types of capacitors such as electrolytic capacitors. These advantages include higher capacitance per unit volume, greater stability and reliability due to hermetically sealed packages, and higher temperature capability up to 125°C. The M39003/09-2035/TR capacitors also have a higher equivalent series resistance (ESR), which gives them superior high frequency performance. The M39003/09-2035/TR can also endure power cycling and short circuit protection due to their low failure rate.

The M39003/09-2035/TR capacitors are widely used in high-frequency telecommunications, electronic instrumentation, military, and avionics systems. They are typically used as decoupling capacitors, which allow transients in the power supply to settle quickly. The M39003/09-2035/TR capacitors are also used in audio systems, particularly where higher precision is required.

The primary purpose of a capacitor is to store an electrical charge. This is accomplished when two electrically conducting surfaces are separated by an insulating material known as the dielectric. The most common type of capacitor used in electronic circuits is the electrolytic capacitor, which uses an electrolytic solution as the dielectric. The tantalum capacitors\' dielectric is made of a thin layer of metal oxide which is formed on the anode.

The M39003/09-2035/TR capacitors have two distinct operating frequencies: bipolar mode and unipolar mode. In unipolar mode, the capacitor is charged and discharged with equal magnitudes, but with opposite polarities. In bipolar mode, the capacitor is charged and discharged with the same polarity. This results in a greater frequency range, more efficient charge/discharge cycles, and a higher capacitance.

When connected in series, the M39003/09-2035/TR capacitors act as a low pass filter, blocking high frequency signals. When connected in parallel, the capacitors act as a high pass filter, passing higher frequencies while blocking lower frequencies. This makes them ideal for applications where signal filtering is needed.

The M39003/09-2035/TR capacitors can also be used as timing capacitors, which can be used to store energy and then release it over a certain amount of time. This is useful for applications such as in a circuit that needs to be powered for a certain amount of time before being shut off.

The M39003/09-2035/TR capacitors offer excellent performance, reliability, and a wide range of applications. They are hermetically sealed, which allows them to operate with minimal external influence and makes them suitable for long-term applications. Their superior high-frequency response makes them ideal for many electronic circuits, and their superior capacitance makes them ideal for decoupling, timing, and signal filtering applications.

The specific data is subject to PDF, and the above content is for reference