M39003/09-4032

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	D (0.001%)
Features:	Military
Manufacturer Size Code:	D
Lead Spacing:	--
Height - Seated (Max):	--
Size / Dimension:	0.351" Dia x 0.786" L (8.92mm x 19.96mm)
Package / Case:	Axial
Mounting Type:	Through Hole
Lifetime @ Temp.:	--
Series:	Military, MIL-PRF-39003/9, CSR21
ESR (Equivalent Series Resistance):	65 mOhm
Type:	Hermetically Sealed
Voltage - Rated:	15V
Tolerance:	±20%
Capacitance:	150µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors

Tantalum capacitors are one of the most widely used types of electrochemical capacitors available. They are a type of electrolytic capacitor and are composed of a solid electrolyte material sandwiched between two conductive plates. The plates are typically made of tantalum metal, which is a highly conductive material that also provides a very good electrical storage capacity. The solid electrolyte material used in tantalum capacitors is usually a titanium dioxide (TiO2) ceramic that has been coated with a thin film of tantalum nitride (TaN). The M39003/09-4032 is a type of surface mount tantalum capacitor, commonly used in a variety of electronic equipment. This capacitor has a rated capacitance of 22µF, a rated voltage of 16V, and a tolerance of ±10%. It is a two-pin component and is made of a solid tantalum core with a TaN coating, which helps to protect it from some of the elements that might otherwise cause degradation or damage. The primary applications of the M39003/09-4032 are in high-frequency circuits and other high-voltage circuits where the capacitance needs to be low and the area required for a certain amount of capacitance must be minimized. The component is especially suited for applications in which the conductor carrying current has to come close to the capacitor or even needs to pass through it without any intervening material. Due to its small size, the M39003/09-4032 can also be used in applications where the component must be concealed behind other components or serve as part of a complex circuit.The working principle of a tantalum capacitor relies on the fact that the electrical potential of a metal surface is lower than that of a ceramic surface, allowing a potential difference to be generated between the two materials. In order to create this potential difference, a voltage is applied to the metal plate, which causes free electrons to move towards the ceramic plate, creating a current flow through the capacitor. The amount of current, or capacitance, that is generated is proportional to the surface area of the two plates and to the amount of voltage applied. The capacitance of the M39003/09-4032 is fixed and can not be changed due to the design of the component. It is also a non-polar capacitor, meaning that the same voltage can be applied to either of the two pins without any adverse effects. Additionally, the component has a low electrostatic discharge sensitivity, which makes it suitable for use in circuits that may be subject to sudden surges in electrical current without risking any damage to the board or components.Overall, the M39003/09-4032 is a highly reliable and efficient tantalum capacitor, perfect for applications with high-frequency circuits, high-voltage circuits, and/or where component area is critical. The component also has a good tolerance for electrostatic discharge, making it suitable for use in a variety of industrial and consumer products.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description