Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors

The M39006/21-0124 capacitors are generally classified as tantalum capacitors. These capacitors are used in various electronic applications due to their larger capacitance in comparison to other types of capacitors, and their low leakage current. Generally, these capacitors are used in high frequency, high speed, and low-power circuit applications.

Application Field

M39006/21-0124 capacitors are mainly used in a wide range of commercial and industrial applications as well as aerospace, military, and scientific applications. They are commonly used in high frequency, high speed, low-power, and other applications where lower capacitance is required. These capacitors are also used in noise suppression to reduce power pulsing caused by impedance in the circuit.

In commercial applications, M39006/21-0124 capacitors are often used in high frequency communications and data transmission, radio-frequency identification systems, medical instrumentation, and consumer audio and video products. In industrial applications, these capacitors are used in power supply regulation, motor controls and power factor correction. In aerospace, military, and scientific applications, these capacitors are often used in the powers supplies for lasers, ion thrusters, and detection instrumentation.

Working Principle

The M39006/21-0124 capacitors use tantalum as the dielectric material. The capacitance is determined by the size and shape of the construction. The electrical current is stored inside the capacitor due to the electric field generated between two metal plates.

A tantalum capacitor is usually constructed using two anode electrodes, two cathode electrodes, and a tantalum dielectric material between the anode and cathode electrodes. The dielectric material is a dielectric oxide layer usually formed by an anodization process. This layer acts as a barrier between the anode and cathode electrodes and stores the electrical charge on the anode and cathode.

When an electrical voltage is applied to the capacitor, electrons flow through the dielectric material which causes an electric field to be generated or stored. This electric field creates an attraction between the anode and cathode electrodes and causes current to flow through the capacitor when the voltage is applied. The current flow is proportional to the voltage applied to the capacitor.

The specific data is subject to PDF, and the above content is for reference