M39006/22-0546H

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	R (0.01%)
Features:	Military
Manufacturer Size Code:	T1
Lead Spacing:	--
Height - Seated (Max):	--
Size / Dimension:	0.219" Dia x 0.515" L (5.56mm x 13.08mm)
Package / Case:	Axial
Mounting Type:	Through Hole
Lifetime @ Temp.:	--
Series:	Military, MIL-PRF-39006/22, CLR79
ESR (Equivalent Series Resistance):	--
Type:	Hermetically Sealed
Voltage - Rated:	30V
Tolerance:	±5%
Capacitance:	15µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors - M39006/22-0546H Application Field and Working Principle

Tantalum capacitors are a type of electrolytic capacitor which is typically made of a tantalum powder with a manganese dioxide electrolyte. These capacitors are characterized by their high volumetric efficiency, low ESR (equivalent series resistance), and long life span. The M39006/22-0546H Tantalum Polymer Capacitor is a relatively new designed device which provides higher capacitance in various package sizes and has greater temperature stability. As such, it is used widely in a range of modern electronic applications.

Applications

Tantalum capacitors are used mainly in automotive, consumer electronics, telecoms, computers and batteries. The M39006/22-0546H is one of the most popular tantalum capacitors on the market. It provides the highest capacitance possible in the smallest size, plus it is able to handle higher temperature and voltage requirements. Common applications for M39006/22-0546H capacitors include personal computers, high-end cameras, tablets, electric vehicles, aviation electronics, industrial control systems, consumer electronics, telecommunications, automotive, military, and weapons systems.

How it Works

Tantalum capacitors consist of two concentric cylinders filled with electrolyte. The positive electrode of the capacitor is held in the center. This is then surrounded by a dielectric material, typically a ceramic, that acts as a separator between the positive and negative plates. The dielectric material helps increase the capacitance by increasing the amount of surface area between the two plates. The M39006/22-0546H Tantalum Polymer Capacitor uses polymer dielectric technology which offers superior stability, lower ESR, and improves performance in a wide range of operating temperatures. It also has higher capacitance in the same package volume than traditional tantalum capacitors.

Advantages & Disadvantages

Tantalum capacitors have a number of advantages compared to other types of capacitors. They are small, lightweight, and provide high capacitance in small package sizes. They also have high volumetric efficiency, low ESR, long life span, excellent temperature stability, and good mechanical shock resistance. These qualities make them well suited for use in high-end applications and consumer electronics. One of the main drawbacks of tantalum capacitors is their higher cost relative to other types of capacitors. Additionally, they can be damaged by heat, excessive current, and reverse voltage. The M39006/22-0546H cap is also relatively new technology and less tested than traditional tantalum capacitors, so there is still a potential for any unexpected failures.

Conclusion

The M39006/22-0546H capacitors offer high capacitance with small sizes and excellent temperature and voltage stability, making them suitable for use in a wide range of modern electronic applications. Utilizing polymer dielectric technology, they are able to handle higher temperatures and voltage compared to traditional tantalum capacitors. However, they are more expensive and prone to damage from heat, current, and reverse voltage, so you should use caution when using them in any application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description