M50100SB600

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	600V
Current - Average Rectified (Io):	100A
Voltage - Forward (Vf) (Max) @ If:	1.2V @ 100A
Operating Temperature:	-40°C ~ 125°C (TJ)
Mounting Type:	Chassis Mount
Package / Case:	Module
Supplier Device Package:	Module

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers - M50100SB600 Application Field and Working Principle

A bridge rectifier is a type of rectifier circuit that converts alternating current (AC) to direct current (DC). The M50100SB600 diode bridge rectifier is a four-diode bridge circuit that incorporates an internal anode-cathode forward voltage drop of 1.2 V. It is able to handle repetitive peak reverse and forward currents up to 25 A and peak, non-repetitive surge currents up to 70 A.

M50100SB600 Application Field

The M50100SB600 bridge rectifier is typically used in the power supplies and AC power sources, such as switched-mode power supplies and AC/DC adapters. It can also be used for various automotive applications, motor drives and other motor control circuits, industrial controls, as well as applications in the medical, consumer, entertainment and telecommunications fields.

M50100SB600 Working Principle

The M50100SB600 diode bridge operates on the principle of positive and negative half-wave rectification. When the input voltage is positive, the two series connected diodes D1 and D2 become forward biased. This allows current to flow through the external load, while the two parallel connected diodes D3 and D4 remain reverse biased. When the input voltage is negative, the same two diodes become reverse biased while the other two become forward biased, allowing current to flow in the opposite direction, thus rectifying the signal.The M50100SB600 diode bridge contains four diodes arranged in a bridge circuit, with each diode having a maximum forward current rating of 25 A. The bridge rectifier is designed so that the total reverse voltage across the bridge does not exceed the maximum peak reverse voltage rating of 800 V. When a load is connected, the diode forward voltage drop across the bridge rectifier is approximately 1.2 V.

Conclusion

The M50100SB600 bridge rectifier is used for converting alternating current to direct current and for many applications in various industries. It is designed with four diodes arranged in a bridge circuit to handle high peak and non-repetitive surge currents, and has a total reverse voltage rating of 800 V. The diode forward voltage drop across the bridge rectifier is approximately 1.2 V.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description