M830320-1K RF/IF and RFID

Series:	Savvi™
Packaging:	Tape & Reel (TR)
Part Status:	Active
Frequency Group:	UHF (2 GHz ~ 3 GHz)
Frequency (Center/Band):	2.4GHz
Frequency Range:	2.4GHz ~ 2.5GHz
Antenna Type:	Chip
Number of Bands:	1
VSWR:	2
Return Loss:	--
Gain:	1.39dBi
Power - Max:	500mW
Features:	--
Termination:	Solder
Ingress Protection:	--
Mounting Type:	Surface Mount
Height (Max):	0.051" (1.30mm)
Applications:	Bluetooth, Wi-Fi, WLAN, Zigbee™

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Antennas - M830320-1K Application Field and Working Principle

An RF antenna is a device that transmits and/or receives radio frequency signals. The M830320-1K antenna is a highly efficient omni-directional antenna, specifically designed for 802.11b/g and 802.11n applications with a 1 kW power rating. In this article, we will discuss the application field and working principle of the M830320-1K antenna.

Application Field

The M830320-1K antenna is ideally suited for applications such as Wi-Fi, LANs, WANs, point to point connections, and other short or medium range radio frequency applications. It is also well suited for mobile applications, such as on-board vehicle applications, and aircraft and marine applications.The antenna has a wide operating frequency range of 2.4 – 2.5 GHz with 1 kW of transmitted power, making it suitable for high-power applications. Additionally, the antenna is designed to handle speeds of up to 54 Mbps in environments that have a high noise or interference. The antenna has an IP65 rating, meaning it is waterproof and resistant to water, dust, and other environmental factors. It also has a radiation pattern of 3-4 dBi, which means that the antenna can maintain signals at a distance of up to 1 to 2 km and is capable of providing access to wider areas.

Working Principle

The M830320-1K antenna works by converting incoming radio frequency signals into electrical signals. It does this through its two main components: the radiating element and the feed line. The radiating element is the physical part of the antenna, which converts the incoming radio frequency signal into an electrical signal. It typically consists of a metal rod, plate, or coil, as well as other components that vibrate when an electromagnetic field is applied. The vibrating motion of the radiating element then generates an electrical signal, which is then fed to the feed line. The feed line is a network of cables, wires, and hoses that transport the electrical signal to the receiving device. The feed line typically leads from the radiating element to the receiving device, with the amount of cables depending on the type of antenna. It also varies depending on the frequency of the signal, as some antennas are designed to work with high frequency signals while others are designed to work with lower frequencies. The M830320-1K antenna is also designed with an integrated amplifier, which amplifies the signal before it is sent to the receiving device. The amplifier increases the power of the signal, allowing for longer range communications. The M830320-1K antenna is an efficient and reliable solution for 802.11b/g and 802.11n applications. Its wide operating frequency range, 1 kW of transmitted power, high speeds, and integrated amplifier make it an ideal choice for many applications. Additionally, it has an IP65 rating which ensures the antenna is protected from water, dust, and other environmental factors.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description