M906-01-187.5000T

Frequency Stability:	--
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.110" (2.79mm)
Size / Dimension:	0.354" L x 0.354" W (9.00mm x 9.00mm)
Package / Case:	36-CLCC
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	0°C ~ 70°C
Absolute Pull Range (APR):	--
Series:	M906-01
Voltage - Supply:	3.3V
Output:	LVPECL
Function:	--
Frequency:	187.5MHz
Type:	VCSO (SAW)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: M906-01-187.5000T Application Field and Working Principle

An oscillator, by definition, is a circuit which produces an output signal that is a repeated waveforms resembling a sine wave, usually at a specific frequency. The M906-01-187.5000T is an oscillator that is mostly used in radio receivers, analogue to digital converters, and in communications and navigation systems.The M906-01-187.5000T, constructed mostly using Resistors, Capacitors and Transistors, produces a constant output frequency between 180kHz to 190kHz. It maintains a reasonable level of accuracy, stability, and low noise, which are all key components in its application field. The working principle of the M906-01-187.5000T oscillator is relatively simple yet efficient. It consists of an amplifying element that is attached to a feedback circuit. Inside this circuit, there is a certain frequency-determining device, such as a capacitor, inductor, or a quartz crystal. When the oscillator is powered, it will push a voltage into the amplification element, which in turn will push out a signal onto the feedback circuit. This signal is then sent back to the amplification element which rebuilds and amplifies it to reach the output port. This process then repeats itself continuously, thus providing a repeating waveform, otherwise referred to as oscillations, which then reach the output port. The frequency of the oscillations depend on the device found in the feedback loop, such as a cryastal or a resistor-capacitor combination, which can be adjusted to fit the user\'s needs. In this case, the M906-01-187.5000T ensures that the frequency of the output signal is between 180kHz to 190kHz.Interestingly, the stability of the M906-01-187.5000T is achieved by the combination of the components in the feedback loop, which improve the frequency tolerance of the oscillator and ensure that it does not produce significant levels of noise. Additionally, the feedback circuit also helps to increase the efficiency of the M906-01-187.5000T, as the signal that is sent back to the amplifying element is strengthened and eventually presented in the output port. Therefore, not only is the M906-01-187.5000T an efficient oscillator that is used in analog to digital converters, radio receivers and navigation systems, but it is also stable and produce stable repeating waveforms that meet the accuracy and low noise requirements of the user. Its ability to output a frequency between 180kHz to 190kHz is the key reason as to why the M906-01-187.5000T is commonly preferred in its application field.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description