M95080-DFMN6TP

The M95080-DFMN6TP is an electrically erasable and programmable memory (EEPROM) product-series of STMicroelectronics. It is commonly used in customer applications where it is necessary to store and retrieve non-volatile data.

M95080-DFMN6TP series are contact, non-volatile serial memory devices organized as 256 x 8, 512 x 8, 1024 x 8, 2048 x 8 and 4096 x 8 bits. The device is organized as 8 blocks of 64 bytes each, for a total of 512 bytes of memory, with each byte containing 8 bits. The M95080-DFMN6TP is the latest in the M95080 series and offers improved performance, enhanced feature sets and increased endurance longevity, when compared to earlier versions.

Features

• High data rate version operates with up to 1.5 Mbps
• Operation voltage 2.7 to 5.5V
• Low power consumption SLEEP MODE (0uA)
• 100K write/erase cycles per memory block
• Data retention of more than 10 years
• ESD protection: 4000V HBM JESD 22-A114F
• Similar performance as the current M95080-RFMN6TP (reduced power and package size)

Operating Modes

The M95080-DFMN6TP EEPROM product is available in 5 different operating modes. These are Wake, Sleep, Idle, Read and Write. During normal operation, the device is in Wake mode. During Wake mode, the device constantly monitors the internal state and interacts with the external user and host machines.

When in Sleep mode, the EEPROM device consumes no current, making it ideal for low power applications. When Sleep mode is activated, the device is completely inactive until a valid wake-up command is received. After wake up the device will return to Wake mode.

The Idle mode is used to reset the EEPROM to the initial state. The device is then ready to accept commands from the external user or host machine. The Read mode is used to read the data stored in the EEPROM memory. This data can then be used for further processing. The Write mode is used to write data to the EEPROM memory.

Working Principle

The working principle of the M95080-DFMN6TP EEPROM is based on charge pumps and voltage inverters which generate an elevated voltage from the power supply. This elevated voltage is used to generate the higher voltages needed to write and erase the memory cells in the device. The higher voltage is internally generated by the charge pumps and is regulated by the internal control logic.

The EEPROM has an internal write operation which requires that the chip address is set, the latch state is written with the data, and the page erase operation is enabled. After the page erase operation is complete, the write operation will commence. The write operation is enabled when a write control signal is enabled. During the write operation, the memory cell will be programmed with the data stored in the latch. The write process is completed when the write control signal is disabled.

The M95080-DFMN6TP EEPROM device is designed to operate with both serial and parallel interfaces. It can also be used in a multi-chip system for higher density storage applications.

Applications

The M95080-DFMN6TP is commonly used in a wide range of applications where non-volatile data storage is required. These applications include automotive applications, industrial communication systems, consumer electronics, medical equipment and industrial automation systems.

In the automotive industry, the M95080-DFMN6TP can be used to store data such as registration codes, vehicle identification numbers or keyless entry codes. In industrial communication systems, it can be used to store network parameters, system time and other settings. In consumer electronics, it can be used to store settings such as television preferences, audio levels and other user-defined settings.

In medical applications, the device can be used to store patient information and medical data. In industrial automation, the EEPROM can be used to store settings such as parameters, alarms and limit settings.

Advantages

The advantages of using the M95080-DFMN6TP EEPROM include, low power consumption, increased endurance and improved performance when compared to earlier versions. It is also designed to be compatible with both serial and parallel interfaces and can be used in a multi-chip system for increased storage density.

The device offers 100K write/erase cycles per memory block, which ensures data retention for more than 10 years. This device is also designed to be protected against electrostatic discharge, making it an ideal choice for applications where protection against shocks and other induced electrical current are necessary.

The M95080-DFMN6TP series is a reliable and cost-effective solution for a wide range of applications where non-volatile data storage is needed. Its increased endurance and improved performance make it an ideal choice for customers who require robust and reliable data storage solutions.

Conclusion

The M95080-DFMN6TP is an electrically erasable and programmable memory (EEPROM) product-series of STMicroelectronics which is used in applications where it is necessary to store and retrieve non-volatile data. It offers enhanced feature sets and improved performance when compared to earlier versions and is designed to be compatible with both serial and parallel interfaces. It also offers 100K write/erase cycles per memory block and data retention of more than 10 years.

The M95080-DFMN6TP series is a reliable and cost-effective solution for customers who require robust and reliable data storage solutions. Its increased endurance, low power consumption and improved performance make it an ideal choice for a wide range of applications.