MABT8

Series:	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
For Use With/Related Products:	--
Moisture Sensitivity Level (MSL):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MABT8 application field and working principleThe MABT8 is a three-wire system to protect valuable radio frequency (RF) installations from nearby lightning strikes. The system is widely used in Radio Frequency (RF) accessories to provide lightning protection for both the transmitter and the receiver. The MABT8 also provides automatic shut-off protection, which prevents RF signals from being transmitted unless the MABT8 status is set to operational mode.The MABT8 is a three-wire system consisting of two conductor wires (a positive line and a negative line) and a ground line. The system works by conducting an electrical current along the two conductors and the ground line. When lightning strikes, the current is diverted away from the RF installation by the MABT8, protecting it from the lightning strike\'s harmful electric current.The system consists of three components - a surge protector, a lightning protection device, and an I/O interface. The surge protector monitors the signal strength of incoming signals and, if necessary, diverts the excess current away from the RF installation. The lightning protection device is connected to the surge protector and monitors lightning activity in the area. If lightning is detected, the lightning protection device disconnects the two conductors from the ground line, the current is diverted, and the protected RF installation is spared from any potential damage. The I/O interface connects between the controller and the MABT8 system. The controller is designed to monitor the MABT8 status and ensure that the system is ready to protect from lightning strikes. The user can also configure parameters of the MABT8, such as the maximum power that can be diverted away from the RF installation.In summary, the MABT8 is a three-wire system used to protect RF accessories from nearby lightning strikes. The system uses surge protectors, lightning protection devices, and an I/O interface to monitor and divert currents away from the installation, thus protecting it from potential damage. It is a reliable and cost-effective solution for protecting valuable RF installations from lightning strikes.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description