MACP-011015 RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Directional Couplers, albeit a simple component that is often overlooked, are a fundamental part of any Radio-Frequency (RF) system. At its core, an RF directional coupler is a three-port device consisting of two essentially identical ports, a coupled port, and a through port, coupled by a transmission line of a specific length. Among these, the coupled port serves as an output interface and the through port serves as an input through which power flows. By definition, RF directional couplers will only allow power to flow from the input to the output, and not vice-versa. To this end, the MACP-011015 RF directional coupler takes its design a step further by incorporating a control box that adds an additional layer of control to the output port.

The MACP-011015 is a four-port device that features a USB control port. This USB port allows users to interface with the device to control the output power. The power can be quickly adjusted, or completely shut off, depending on the user\'s needs. Furthermore, the control box offers real-time temperature monitoring for most of the components within the MACP-011015 directional coupler. As such, users can monitor the temperature of the device in real-time, helping to ensure accurate readings and operating temperatures.

As for its application field, the MACP-011015 directional coupler is designed to provide a link between an RF source and a destination point when used in a point-to-point configuration. This makes the device ideal for linking multiple destinations across long distances, allowing the user to control the output power of each destination pipe from a single source. As a result, the MACP-011015 is suitable for a wide range of applications, such as 4G/LTE, WIMAX, Mobile Communications, Broadcast, Wi-Fi, and more.

The MACP-011015 RF directional coupler makes use of the skin effect for RF attenuation. This is an electromagnetic phenomenon that creates a zone of high RF resistance near the outer perimeter of any conductive environment such as the MACP-011015 directional coupler\'s combined transmission line. As the frequency of the transmitted signal increases, the resistance of this region (i.e., the skin effect) also increases. This process results in a decrease in power flow between the input and output ports of the MACP-011015.

The MACP-011015\'s control box comes in two separate configurations: manual and digital. In the case of the manual configuration, the control box provides the user with access to a potentiometer that can be used to adjust the reference level of the signal. This potentiometer is in the form of a rotary knob, which allows users to quickly adjust the reference level at their convenience. In contrast, the digital options features digital controllers that come with a microcontroller-based frequency source to allow users full control over the power output levels.

In general, the MACP-011015 RF directional coupler is capable of providing high signal isolation with low insertion loss. This makes it ideal for use in applications that require long run times, such as broadcasting radio and television signals. Furthermore, due to the device\'s low insertion loss, its total power dissipation is minimized, meaning the device requires less power to operate. Finally, the device\'s USB control port makes it easy to control the power output of the device, allowing users to quickly adjust the output levels to suit their specific application.

The specific data is subject to PDF, and the above content is for reference