Series:	MAF
Packaging:	Tape & Reel (TR)
Part Status:	Active
Filter Type:	Power Line
Number of Lines:	1
Current Rating (Max):	800mA
DC Resistance (DCR) (Max):	351 mOhm
Ratings:	--
Operating Temperature:	-55°C ~ 125°C
Package / Case:	0402 (1005 Metric)
Mounting Type:	Surface Mount
Height (Max):	0.022" (0.55mm)
Size / Dimension:	0.039" L x 0.020" W (1.00mm x 0.50mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Ferrite Beads and Chips are essential components for various electronic devices and circuits, such as multi-mode filters, power supply lines, and other control circuits. Among them, the MAF1005GAD701DT000 is a commonly used type. In this article, we will discuss the application field and working principle of MAF1005GAD701DT000.

Applications of MAF1005GAD701DT000

MAF1005GAD701DT000 is mainly used for various analog circuits and digital IC circuits. It is most suitable for analog circuits that require high signal isolation performance, such as RF, high-frequency, and power filtration. It can also provide stable voltage supply for the main control circuit, filter out external interference signals, and improve the stability of the circuit. In addition, it is widely used in medical devices, industrial control systems, automotive electronics, home appliances, and other consumer electronics and communication systems.

Working principle of MAF1005GAD701DT000

The MAF1005GAD701DT000 is a ferrite bead chip, which mainly consists of a ferrite core, two coils, two capacitors, and two resistors. The core is composed of two parts, the inner core and the outer core (or the insulation casing). The inner core is mainly used to focus the magnetic field generated by the coil, and the external core provides magnetic insulation and electromagnetic shielding. The working principle of the ferrite bead chip is basically the same as the common filter circuit. An alternating current signals enters the input end of the coil and the core, and then passes through the resistance, capacitor and coils connected in series, and then outputs to the circuit. The alternating current signals are filtered and converted into direct current signal in the process. The two coils can provide relatively strong magnetic field within the chip. When the external interference signals enters the chip, the two coils can interfere with each other, thus attenuating and distorting the external noise signal, and outputting a relatively weak signal. The two capacitors and the two resistors form a low-pass filter circuit, which can further filter out the high-frequency signal that is not needed. In this way, the chip can filter out and reduce the interference of external noise signals on the circuit.

Conclusion

In conclusion, the MAF1005GAD701DT000 is a commonly used type of ferrite bead chip. It has many applications in various analog circuits and digital IC circuits, and it can filter out and reduce the interference of external noise signals on the circuit by the working principle of coil, capacitor and resistor. In this way, it can improve the stability of the circuit and ensure the accuracy of data transmission.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description