MAX202ECSE+TG068

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX202ECSE+TG068 is an integrated device that is used to provide a reliable and cost-effective interface between low voltage (5 V) logic and high voltage (up to and exceeding 12 V) logic. The device comprises both a single transceiver and a half duplex receiver, and is designed specifically to eliminate ground noise and pick up transients from the environment. This makes it an excellent choice for applications such as motor and automotive control, closed loop manufacturing, safety monitoring and power supply indicators, as well as other industrial and commercial applications requiring reliable, low power, and low cost communication.

According to the design, the MAX202ECSE+TG068 provides compatibility between Logic open drain outputs, such as those typically found in 3.3V logic, and logic inputs of higher level logic families. The device provides full bidirectional communication, with an interface port running up to 12 V, and a logic port running down to 5 V. A logic port enable is also provided for bidirectional direction control. The device also has an integrated chip enable (CE) pin for external control.

The MAX202ECSE+TG068 consists of four main parts: the transceiver, the receiver, the control logic, and the power. The transceiver and receiver segment the complete logic into two parts: the transmitter, and the receiver. The transmitter is responsible for transmitting the logic signals from the logic port to the interface port, while the receiver is responsible for receiving the logic signals from the interface port. The control logic ensures the data communication is carried out according to the device state, and the power segment is responsible for providing power to the device.

The working principle of the MAX202ECSE+TG068 is based on the principles of “open drain” logic. This logic operates on the principles of the open drain power source, where a constantly charged open drain power source is applied to the input of the device. When a low voltage logic signal is sent to the device, the power source is cut off, creating a low voltage signal at the output. When a higher voltage input is applied, the open drain power source is reactivated, creating a high voltage signal at the output. This process allows the device to switch between high and low voltages based on the input signal.

The MAX202ECSE+TG068 is designed to provide a reliable, cost-effective interface between low voltage logic and high voltage logic. It has integrated chip enable, erasing the need for external circuitry, and its open drain design philosophy helps reduce noise and improve efficiency. It can be used in a wide range of applications, as it is suitable for both 3.3V and 5 V logic, and can be used in applications including automotive, industrial, and commercial use.

The specific data is subject to PDF, and the above content is for reference