MAX211ECAI+

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	RS232
Number of Drivers/Receivers:	4/5
Duplex:	Full
Receiver Hysteresis:	500mV
Data Rate:	120Kbps
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Surface Mount
Package / Case:	28-SSOP (0.209", 5.30mm Width)
Supplier Device Package:	28-SSOP
Base Part Number:	MAX211

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

MAX211ECAI+ is an industrial-grade half-duplex isolated RS-232 transceiver from Maxim Integrated, designed for operation in both half-duplex and full-duplex configurations. Equipped with an integrated logic-level converter and enable/disable function, it is engineered for data transmission, reception and signal conditioning for RS-232 compatible applications. In this document, we will explain the application field and working principle of MAX211ECAI+.

Application Field

The MAX211ECAI+ is mainly used for medical, industrial and consumer applications which require RS-232 communication over larger distances. The easy-to-implement isolation solutions provided by the MAX211ECAI+ helps to minimize EMI, reduce ground looping and allow data transmission up to and beyond 100m. It also simplifies biasing and termination and provides a very reliable data transmission system.In addition, the MAX211ECAI+ provides excellent protection with an isolation spec that surpasses 1000Vrms typical. This high level of isolation provides a safe operating environment which reduces the chances of failure due to overvoltage issues. The device also provides a wide input dynamic range (from 2.25V to 5.25V), which eliminates the need for levelshifters or level translators for most applications. This makes the MAX211ECAI+ perfect for translating voltages from various types of microcontrollers as well as from RS-232 to TTL and vice versa.

Working Principle

The MAX211ECAI+ is a special-purpose semiconductor device that provides isolation between two signals. It is designed to transmit data in both directions using half-duplex operation, meaning it can send and receive data but not at the same time. The device consists of four transceivers: two in the transmitter section and two in the receiver section. Each transceiver is composed of two transistors – a “driver” and a “receiver” – that provide separate pathways for the data to flow in either direction. The driver transistors are used to convert the logic-level control signals into TTL voltage levels, while the receiver transistors accept the TTL signals and convert them back into logic-level output signals.The MAX211ECAI+ also includes a separate enable/disable pin. This pin can be used to switch the transceiver on or off, thereby ensuring that data is only transmitted and received when it should be.

Conclusion

The MAX211ECAI+ is a highly versatile transceiver designed for use in industrial, consumer, and medical applications which require reliable, low-noise data transmission over longer distances. It provides exceptional protection against overvoltage damage with an isolation spec surpassing 1000Vrms typical, and its wide input dynamic range and integrated logic-level converter eliminate the need for levelshifters. The integrated enable/disable pin further ensures reliable data transmission.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description