MAX2044ETP+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF mixers are electronic components that take two discrete signals as inputs and mix them together to produce a harmonically unrelated output signal. This type of mixer is a commonly used device in RF signal processing and has a wide range of applications in communication systems.

The MAX2044ETP+T is a high performance three port RF mixer from Maxim Integrated Products. This device is designed for use in direct conversion transmitter and receiver applications. It features low-cost surface mount packaging, wide operating frequency range from 3 to 8 GHz (RF, LO & IF) and low noise figure of only 0.7 dB. In addition, the MAX2044ETP+T provides excellent isolation performance with good input and output matching.

Let us examine the operating principle of this device. A simplified schematic diagram is shown below. The principle is based on the passive mixing of two signals by the use of a diode. This is called a "balanced Diode Mixer". In this type of mixer, two signals, usually referred to as LO (local oscillator) and RF (radio frequency) are combined using diodes. When two signals of different frequencies are applied to the diode, the output contains both the sum and the difference frequencies of the two inputs.

The highest achievable conversion efficiency is achieved when the imput signals are in phase. As the relative phase angle is varied from 0 to 180 degrees, the conversion efficiency is also varied in that same range. When the LO and RF signals achieve a balanced phase-angle the conversion effeciency reduces to zero.

This RF mixer has many applications in wireless communications systems. It is used in direct converstion transmit-receive applications. As such, MAX2044ETP+T can be used in a transceiver system as a device to convert RF signals to digital information by combining the RF signal with a reference signal. It can also be used as a mix-down or up-conversion device for moving signals between different frequency bands. In addition, this mixer can be used to multiply to signals together for frequency multiplication and arbitrary waveform generation.

The MAX2044ETP+T is an efficient and cost-effective 3-port mixer ideal for wideband wireless applications. It features low cost, small size and excellent performance. The device has been designed to be used in direct conversion receiver and transmitter applications. Furthermore, the device has good isolation between the input ports which makes it suitable for use in multi-receiver systems.

The specific data is subject to PDF, and the above content is for reference