MAX4174BKEUK-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX4174BKEUK-T is a linear amplifier with instrumentation, OP amplifiers, and buffer amplifiers applications. It is a wide-bandwidth, high gain instrumentation amplifier. It has a low-input bias current and low offset voltage, so it is ideal for high impedance instrumentation applications.

This device is designed to provide good performance over a wide range of frequencies, up to 20 MHz. It features low DC offset voltage, high-impedance input, and a wide voltage range. It has high CMRR, allowing it to accurately measure signals with wide frequency variation.

The working principle of MAX4174BKEUK-T is based on the concept of a current buffer. A current source is connected to the input which is then buffered by a dynamic gain amplifier. The buffered signal is then conditioned with a notch filter and output is then amplified by an output stage.

MAX4174BKEUK-T is suitable for use in critical precision applications, such as high-voltage or low-current instrumentation systems. It provides good gain and linearity over wide frequency ranges. It has a wide range of temperature operating range, from -40°C to +85°C.

For most applications, the best way to use MAX4174BKEUK-T is to configure it as a single-stage amplifier with input and output stages. The input stage is usually configured as a differential amplifier with an emitter-follower as its output stage. This provides a good CMRR ratio and allows the input impedance of the amplifier to be higher than usual.

The MAX4174BKEUK-T also features a low-noise amplifier, which can be used to reduce noise in the signal path. To use this feature, the output of the amplifier should be connected to the low-noise amplifier input. The output of the low-noise amplifier is then amplified by the MAX4174BKEUK-T output stage.

In addition to its various functionality, the MAX4174BKEUK-T also includes a power-down mode which can be used to increase the efficiency of the device. The power-down mode allows the device to shut down when the input signal is too low. This can be enabled or disabled depending on the application.

In summary, the MAX4174BKEUK-T is a high-performance linear amplifier with instrumentation, OP amplifiers, and buffer amplifiers applications. It provides excellent gain and linearity over a wide frequency range with its low input bias current and low offset voltage. It also features a low-noise amplifier and a power-down mode which makes it suitable for precision instrumentation systems.

The specific data is subject to PDF, and the above content is for reference