MAX4204ESA+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX4204ESA+T is a high-performance, rail-to-rail, instrumentation amplifier with a low cost and high common-mode rejection ratio (CMRR). It is designed to provide excellent performance and high reliability in a wide range of applications. The device utilizes a single-ended output to provide the highest level of accuracy and dynamic response. It is ideal for use in precision signal conditioning and monitoring applications. It is also suitable for use in various applications such as data acquisition, analog-to-digital conversion, voltage measurement, and motor control.

The MAX4204ESA+T has a low power consumption of only 0.3 mA per amplifier and can operate from a single supply of up to 6 V. It has an output impedance of 0.3 ohms and a low input bias current of 8 pA. The device also features a low offset voltage of less than 200 μV, a wide operating temperature range of -40°C to +125°C and a minimum closed-loop gain of 1 V/V.

The main features of the MAX4204ESA+T are its low input bias current, high common-mode rejection ratio (CMRR), rail-to-rail outputs, low noise, high-input impedance, and wide supply voltage range. The rail-to-rail outputs allow the device to deliver full-scale results even when the supply voltage is near the rails. The high common-mode rejection ratio (CMRR) ensures that the signal will remain immune to any input sources that may be present in the environment. The low-noise and high-input impedance of the device ensures that the signal is accurately converted without any noise or interference.

The working principle of MAX4204ESA+T is based on the theory of operational amplifiers (op-amps). The device is designed to amplify small input signals while maintaining a high common-mode rejection ratio (CMRR). The device consists of two input terminals (non-inverting and inverting) and one output terminal. The non-inverting input is connected to the power supply voltage and the inverting input is connected to ground. When an input signal is applied to the non-inverting input, the output is driven by the difference between the non-inverting input and the inverting input. The inverting input is equal to the input signal plus the bias current multiplied by the input resistance. The output voltage is then amplified by the gain determined by the ratio of the input resistance and feedback resistor.

The MAX4204ESA+T is suitable for use in a wide range of applications. It can be used for precision signal conditioning and monitoring, data acquisition, analog-to-digital conversion, voltage measurement and motor control. Its wide range of features makes it the perfect choice for any of these applications.

The specific data is subject to PDF, and the above content is for reference