MAX4243EUB+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX4243EUB+T is a 2 MHz rail-to-rail input and output single operational amplifier (op amp) with a minimum gain of -10dB and a maximum voltage swing of 10V. It is designed to work with a wide range of applications, including computations, auto control, medical instrumentation, and data acquisition systems. This device is also optimized for low-power, low-voltage operation and is fully specified for both low-speed and high-speed performance.

The MAX4243EUB+T has rail-to-rail inputs and a low input bias current, making it ideal for high side current-sense applications. It has a low quiescent current of 4μA maximum for improved battery life in portable equipment. The amplifier is stable for all capacitive loads and requires no external compensation. This allows for operation in wide bandwidth and high slew rate applications.

The device operates over an extended temperature range of -40°C to 125°C and is available in an 8-pin TSSOP/PDIP package. The amplifier is also protected against output current overload with programmable overload protection (OP). This feature allows the device to be used safely in hot plugging applications, which require precision output voltage with low quiescent current.

In addition to this, the MAX4243EUB+T has a wide supply range of 3V to ±10V. This helps ensure a stable performance in a wide range of applications. Moreover, the amplifier is well suited for single-supply applications, as it does not require separate power-supplies for each rail. The device has excellent CMRR (common mode rejection ratio), which allows it to be used in noise-sensitive systems. The amplifier also has a -3dB bandwidth of 1.2MHz and a slew rate of 2.5V/μs.

The MAX4243EUB+T is designed for instrumentation, optoelectronic and driving applications. The amplifier’s rail-to-rail inputs and output interface ensures that it has the necessary voltage range to work with optoelectronic signals and other lower-voltage signals. The device can be used in a variety of applications such as data acquisition, temperature measurement and optical detection. In addition to this, the device is suitable for driving laser diodes, LEDs and other light sources.

The MAX4243EUB+T is capable of working in different modes, such as the inverting, non-inverting buffer, amplifier, and follower. The non-inverting configuration provides a voltage gain of +1 while the inverting configuration provides a gain ratio of -1, making the device ideal for closed-loop control applications. The input circuits use an inversion feature, which helps eliminate the need for input resistors, thus significantly reducing power consumption.

The device’s working principle is based on an NPN bipolar operating transistor and PNP emitter follower configuration. The operational amplifier consists of two NPN bipolar transistor stages, and a PNP emitter follower stage. The output is taken directly from the emitter follower stage and follows the input voltage with unity gain. The two transistors are operated in common-emitter configuration, with the output connected to the collectors of the transistors and the input connected to the emitters. The output is zero bias so that the output voltage is a linear multiplication of the input voltage.

In conclusion, the MAX4243EUB+T is an ideal choice for a wide range of applications in the instrumentation, optoelectronic and driving fields. The device has rail-to-rail inputs and a low input bias current and is designed to work over an extended temperature range. The device also has excellent CMRR and a 1.2MHz bandwidth and is capable of operating in inverting, non-inverting buffer and amplifier configurations. The device’s working principle is based on an NPN bipolar operating transistor and PNP emitter follower configuration.

The specific data is subject to PDF, and the above content is for reference