MAX4435EUK-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX4435EUK-T is a low-noise, wide-bandwidth, rail-to-rail output op amp with single-supply operation from 3 V to 16 V. The device is designed to meet automotive requirements and is AEC-Q100 qualified with the required high-reliability parts. The device has a typical voltage noise density of 5 nV/√Hz and a wide bandwidth of 1.5 MHz. It can be used as a driver for active filters, line drivers for audio systems, power buffers for LED displays, and for driving low-impedance loads.

Functionality & Features

The MAX4435EUK-T is an auto-zeroed op amp that operates on a low voltage of 2.7 V and is suitable for applications requiring low power consumption. It can be powered from either a single supply or dual supplies, with its robust rail-to-rail output allowing direct connection to a wide range of outputs. Low-noise hardware is built into the package offering up to a 95 dB signal-to-noise ratio. Max 4435EUK-T is able to drive wide bandwidth signals (1.5MHz) which makes it suitable for power buffer for LED displays, driving low impedance sources and for driving active filters.

Working Principle

The MAX4435EUK-T is an Amplifier Electronic Subsystem (AES) that amplifies an input signal and provides power to an output device. Its architecture is based on a voltage-feedback (VFB) amplifier, which is composed of an amplification circuit and a feedback loop for providing a closed-loop gain. The system also includes a rail-to-rail output stage and a wide operating voltage range of 2.7 V to 16 V, suitable for automotive applications.

The MAX4435EUK-T works by using the voltage feedback amplifier design. The amplifier employs a negative feedback loop that is used to maintain the desired input-to-output gain ratio. This gain ratio is set by the ratio of resistors connected to the summing node of the amplifier. The output of the amplifier is then stabilized using the amplifier\'s compensation pin, which is an adjustable pin. When the output of the amplifier reaches the desired level, the circuit is complete and the amplifier is then ready to accept input signals.

Application Field

The MAX4435EUK-T is designed for automotive applications including automotive audio systems and LED displays. Its low power and wide bandwidth (1.5MHz) makes it suitable for active filters, line drivers for audio systems, and power buffers for LED displays. The device\'s low-noise (5 nV/√Hz) and low-power features, combined with its AEC-Q100 qualification, make it extremely well-suited for applications requiring efficient and reliable operation over a wide range of temperatures.

The device can be used in applications such as voltage-to-current or current-to-voltage applications, such as motor drivers, current sense amplifiers, current-mode logic (CML) drivers, and comparators. Additionally, the device can be used in precision voltage-to-current applications such as current mirrors and current sources. Finally, the device\'s capabilities make it suitable for integration into mobile audio systems, such as cellular phones, tablets, and wearables.

Conclusion

The MAX4435EUK-T is an op amp designed for low-power, low-noise and wide-bandwidth applications. Its AEC-Q100 qualification and rail-to-rail output capability make it suitable for applications in the automotive space such as audio systems and LED displays. The device is also suited for a range of other applications such as motor drivers, current sense amplifiers, current-mode logic drivers, comparators, and current mirrors.

The specific data is subject to PDF, and the above content is for reference