MAX483CPA+

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	RS422, RS485
Number of Drivers/Receivers:	1/1
Duplex:	Half
Receiver Hysteresis:	70mV
Data Rate:	250kbps
Voltage - Supply:	4.75 V ~ 5.25 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Through Hole
Package / Case:	8-DIP (0.300", 7.62mm)
Supplier Device Package:	8-PDIP
Base Part Number:	MAX483

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

MAX483CPA+, or the Maxim Integrated MAX483, is a 4-channel serial-bus transceiver developed and manufactured by Maxim Integrated. It is a versatile ESD-protected, low-power CMOS transceiver package that features a low-power shutdown mode, AutoTransmit, and wake-up functions. It can be used to interface between a microcontroller and a serial bus on a system board, such as a LIN bus, motor control, wide-bus logic, or bi-directional logic systems. The MAX483 consumes less than 3 mA and operate over wide ranges of temperature and supply voltage. Furthermore, it is protected from electrostatic-discharge and overflow pulses, over-temperature shutdown, and has a maximum output current of 40 mA per channel. The MAX483CPA+ Application Field and Working Principle will be discussed further in the sections below.

Application Field

The MAX483CPA+ is a versatile device designed for a wide range of applications, such as motor control, wide-bus logic, and bi-directional logic. Its low-power and ESD-protected package make it an ideal choice for low-power applications. For motor control applications, the MAX483CPA+ is perfect for interfacing microcontrollers with LIN databases and control buses. It has the capability to control motor speeds and provide feedback on motor power, allowing the microcontroller to adjust the motor speed or power based on user input. The MAX483CPA+ is also great for wide-bus logic applications, such as addressing low-density logic chips. It can address multiple low-density logic chips in a single system, allowing for a simpler design and greater flexibility when dealing with multiple chips. Additionally, it can be used to facilitate bi-directional signaling, meaning it can send and receive signals over a single bus. The versatility of the MAX483CPA+ in this regard makes it an ideal choice for multiple types of projects.

Working Principle

The MAX483CPA+ operates using a variety of components, including a bidirectional transceiver, a wake-up/shutdown control circuit, and a power supply voltage. The bidirectional transceiver has four channels: two for transmitting data, one for receiving data, and one for shutting down the transceiver. The two transmitting channels convert TTL logic-level signals into differentiated signals that can be received by the bus or by a microcontroller. The receiving channel converts the received signal into TTL level logic. The shutdown control circuit is responsible for powering down the transceiver when the current consumption is too high or when the device is not in use. This allows for significant power savings and increased reliability. The power supply voltage allows the transceiver to operate at low power levels.

Conclusion

The MAX483CPA+ is a versatile and powerful device that can be used for a wide range of applications. Its low-power and ESD-protected package make it an ideal choice for low-power systems, and its wake-up/shutdown control circuit allows for significant power savings. Additionally, its four channels allow it to handle bidirectional communication, making it perfect for motor control, wide-bus logic, and bi-directional logic applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description