MAX483EESA+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX483EESA+T is an integrated circuit for use in various interface applications, such as drivers, receivers, and transceivers. This integrated circuit combines both a high-speed RS-485 transceiver and a non-inverting EIA-422/EIA-485 line receiver in one integrated package. The MAX483EESA+T is also known as a multi-protocol transceiver. It is capable of transmitting and receiving either two-wire or four-wire serial data as determined by the logic level of an external interface pins.

The MAX483EESA+T is widely used in various applications including industrial control systems, automotive electronics, printers, modems and other communication equipment. It is capable of operating in temperatures ranging from -40°C to +85°C, making it suitable for use in extreme temperatures.

The device is designed to handle large-scale data transmission in a variety of transmission rates that range from 15kbps to 1mbps. It has a high level of ESD tolerance that allows it to withstand up to 8kV on air without suffering from any long-term damage or performance degradation.

The MAX483EESA+T is a multi-protocol transceiver and is compatible with the EIA 422-A, EIA 422-B, EIA 485-A and EIA 485-B standards. It has a low-power shutdown mode which reduces its power consumption. This allows it to be used in applications that require low-power, such as battery-powered systems.

The MAX483EESA+T has two operating modes, normal and shutdown mode. In normal mode, it receives data from the transmitting driver and transmits it to the receiving driver, while in shutdown mode it is not receiving or transmitting any data. It is possible to choose the direction of data transmission by setting the appropriate logic level on the RTS (Request To Send) pin. The MAX483EESA+T has a high-impedance output which allows for multiple devices to be connected in parallel.

The MAX483EESA+T uses a three-state logic that has three possible states, logic low, logic high, and high impedance. The logic levels can be monitored using the appropriate pin. The input data is transmitted using a differential line code that consists of two non-inverting (high) signals and the receiver converts them into the logic levels according to their positions on the differential line.

The MAX483EESA+T is an expensive integrated circuit and is typically used in applications that require high speed data transmission over long distances. It also supports simple to complex communication protocols, making it useful in a variety of applications. Its high level of ESD tolerance makes it a great choice in environments with high levels of ESD, such as automotive and industrial applications.

The specific data is subject to PDF, and the above content is for reference