MAX487ECSA+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX487ECSA+T is a low-power, small-size, highly-reliable transceiver for digital data transmission. It is designed for RS-485 and other half-duplex applications in data acquisition and control where noise immunity, error-free transmission and low-power consumption are primary concerns.

The MAX487ECSA+T is well suited for a variety of applications from single-ended, to balanced, to multi-drop systems. This device is packaged in a small 16-pin TSSOP package and operates with a logic supply of 3.0V to 5.25V. It can drive up to 256 loads on the bus due to 1/8th unit load operation. The device features an active idle driver output that allows the user to reduce power consumption in standby applications.

Application Field & Working Principle of MAX487ECSA+T

The MAX487ECSA+T is ideal for a variety of applications in the field of data acquisition and control, such as local area networks, intelligent RJ45 connections, smart sensors, industrial automation data links, and building automation systems. It is also widely used in automotive, telecom, consumer electronics, healthcare, and military/aerospace applications.

The MAX487ECSA+T is a 3.3V half-duplex transceiver that provides an Ethernet-compatible Balanced Voltage Mode (BVM) interface between controller and receiver devices. It puts out a balanced voltage output compatible with the RS-485 standard for both receive and transmit operations. It requires an external pull-up resistor for correct operation and does not have an internal pull-up resistor.

The transceiver consists of two transmitters and two receivers, with each capable of running at speeds up to 10 Mbps. The two transceivers are independently enabled and can be used together to send or receive data. The MAX487ECSA+T also features a differential charge-pump voltage converter that provides a constant output voltage to the drivers of up to 32 V in order to maintain signal integrity in both noisy and EMI/RFI environments. It also features a fail-safe circuit that allows for a default low-level output in the event of an open or shorted connection.

The MAX487ECSA+T has a very high receive threshold and features a programmable receive sensitivity to distinguish between a valid signal and noise. This ensures reliable data transmission over the bus. It also provides the capability to recover accurately from signal transitions that occur faster than the receivers can track. Apart from it, its output drivers use Slew Rate Limited Drivers that reduce EMI emissions.

To conclude, the MAX487ECSA+T is a versatile transceiver with low-power consumption, noise immunity, and robust features that make it an ideal solution for a wide range of demanding data acquisition and control applications.

The specific data is subject to PDF, and the above content is for reference