MAX487ECSA+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX487ECSA+ is an advanced low-power transceiver for RS-485 and RS-422 applications. It is designed to meet the requirements of automotive and industrial environments. This device features a low-power shutdown mode, which reduces power consumption to <100µW when enabled. The device also has a wide common-mode operating range, which allows for communication over short and long networks. Additionally, the device is designed with a low-propagation-delay time, which helps to reduce the number of resends and retries.

The device features a slew-rate control, which allows for data speeds of up to 2Mb/s. It also features a fail-safe receiver, which allows for data reception in the case of an open circuit. The MAX487ECSA+ is capable of driving up to 32 nodes on a single bus, and includes built-in surge suppression which protects against ESD transients. The device provides error detection and parity checking on both the transmit and receive data, and features two enable pins which can be used to enable and disable the output drivers and receivers.

The MAX487ECSA+ operates on a single +3V to +3.6V supply and can withstand +/-35V on its I/O pins. It is available in a variety of package types, including quad flatpack and the MSOP-10 surface mount. The device is immune to noise generated by electric motors and is rated for temperatures from -40°C to +125°C.

The MAX487ECSA+ can be used in a variety of applications, such as automotive networks, industrial automation, and fieldbus networks. It is commonly used for communication between devices over short and long distances, and is also suitable for noise interference applications. Additionally, the device is suitable for connecting multiple nodes together in data acquisition and control systems.

The MAX487ECSA+ operates in two modes: Half-Duplex or Multi-Drop. In Half-Duplex mode, the device transmits and receives data simultaneously, while in Multi-Drop mode, multiple nodes can be connected to the same bus. The device is capable of driving up to 32 nodes in Multi-Drop mode, and includes surge suppression to protect against ESD transients. The device also provides error detection and parity checking on both the transmit and receive data.

The MAX487ECSA+ uses differential signaling for communication with the connected nodes. The device transmits data over two lines: a receiver line (Receiver) and a transmitter line (Transmitter). The Receiver line carries the data from the source node to the destination node, while the Transmitter line carries the data from the destination node to the source node. The device is capable of driving up to 32 nodes over a single bus, and includes surge suppression to protect against ESD transients.

The MAX487ECSA+ is a versatile transceiver for RS-485/RS-422 applications. It is designed for use in automotive, industrial environments, and data acquisition/control systems. It is immune to noise generated by electric motors, and is rated for temperatures from -40°C to +125°C. Additionally, the device provides error detection and parity checking on both the transmit and receive data, and features two enable pins which can be used to enable and disable the output drivers and receivers.

The specific data is subject to PDF, and the above content is for reference