MAX488ECSA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX488ECSA is a four-channel, bidirectional voltage-level translator, designed to interface between devices operating with different voltage levels. It can be used in applications where devices operating at 5.0V need to be interfaced to 3.3V devices. MAX488ECSA enables communication between digital devices, making it suitable for a wide range of applications, with a five-channel bus, three-channel receiver and transceiver, a self-diagnostic interface, and a flexible control scheme.

MAX488ECSA is a low-power device, requiring only a single +3.3V or +5V supply, and includes on-chip drive circuitry to maintain high current drive capability on all channels. The output stage is protected against short-circuits and over-voltage. The device is designed to meet the most stringent level of performance, with designed-in fault-protection features and low voltage operation.

The MAX488ECSA is also designed to be used in multi-drop configurations, such as in DataBus systems. The bus lines are protected against induced voltages up to a limit of 10V, and the device can sink a maximum of 20mA from each I/O line. The device can also detect serial back-EMF from other devices on the bus and protect against signal degradation from it.

The MAX488ECSA includes built-in self-diagnostics that can detect faults on all four channels. The self-diagnostics are available for both the bus and receiver/transceiver channels, allowing for status monitoring and data error detection. The self-diagnostics of the device consists of a hall-effect spring-balance circuit, resistor-capacitor filters, voltage dividers, comparator circuits, and a diagnostic signal detect circuit.

MAX488ECSA is ideal for use in a variety of applications, such as medical, consumer and industrial control equipment, audio/video equipment, and instrumentation. It is suitable for bidirectional data transfer between devices operating at different levels of voltage, and can be used in multi-drop configurations. It is also suitable for systems requiring high-speed communication and high level of fault detection. The device is convenient to use, with its low power requirements, built-in protection circuitry, and its high level of self-diagnostics.

The specific data is subject to PDF, and the above content is for reference