MAX5035DUPA+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX5035DUPA+ is a unique device in the world of power management integrated circuits (PMIC). This device is a DC to DC switching regulator, known as a DC-DC buck regulator, and is used to step-down a higher voltage to a lower one. It helps to make sure the right amount of power is delivered to all devices connected to the system. This type of regulator, along with DC-DC boost and buck-boost regulators, is increasingly in demand due to the wide range of applications in which they are used.

The MAX5035DUPA+ has a wide operating voltage range, allowing for seamless transitions between higher and lower voltages. It also has earphone driver protection and can support up to 6A peak output current. Making a buck regulator ideal for low voltage drop applications, this device also has low power noise immunity, which prevents it from suffering from over-voltage conditions. This device has further protection against output over-current, as well as current limit and over-temperature shutdown.

In addition, the device has a regulated output voltage with a good load and line regulation. It also has a fast response time of 26µs under 0.5A load current and a low output ripple of 2% over the temperature range. The MAX5035DUPA+ also has a low quiescent current of 2.5mA and a wide input voltage range of 4.5V to 28V that allows it to operate in a variety of conditions.

As an example, the MAX5035DUPA+ can be used as a 5V to 3.3V 1A buck regulator in a system with a 5V input voltage. The MAX5035DUPA+ will step-down the voltage to 3.3V and provide the necessary regulated current for a connected device safely. As such, this regulator can be used for a variety of systems, such as portable medical devices, industrial equipment, wireless base stations, and automotive electronics.

The working principle of the MAX5035DUPA+ is fairly simple. First, when the control pin is given a high logic signal, the power MOSFET switches are closed, sourcing current from the input voltage and outputting it to the load. A feedback voltage is given to the error amplifier, which compares it with the reference voltage. This comparison informs the duty cycle of the MOSFET and the amount of current that is sourced from the input voltage.

When the duty cycle is increased, more current is sourced, leading to a higher output voltage. As the output voltage reaches the reference voltage, the error amplifier stops increasing the duty cycle. This mechanism keeps the output voltage stable, allowing for a well-regulated output power. The output current is also limited to the set current limit, which is set by the external resistor, thus allowing the regulator to offer current protection to the connected load.

The specific data is subject to PDF, and the above content is for reference