MAX5152ACEE+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition – Digital to Analog Converters (DAC) are used in many applications where digital input is converted to analog signal outputs. The MAX5152ACEE+T is a fast, monolithic, single-supply, 10-bit voltage output digital to analog converter (DAC). Its small form factor and low power design make it a great choice for applications in which space and power are a concern. This article will discuss the application field and working principles of the MAX5152ACEE+T.

The MAX5152ACEE+T is suitable for industrial control systems, motor control, securities and power management. Additionally, it is also used in telecommunications, automotive and consumer applications. With its fast settling time, low power consumption and wide operating temperature range, the MAX5152ACEE+T is an ideal choice for a variety of applications. It interfaces with standard industry logic such as TTL, CMOS, LVTTL, LVCMOS and ECL. Additionally, the DAC has an integral voltage reference, allowing for direct connection to a common 0V and 5V power supply. This DAC is also capable of generating a programmable voltage between 0V and 5V.

The MAX5152ACEE+T features a fast settling time of 20µs and a low supply current of 8.5mA. This allows for a maximum update rate of 10MHz under heavy loading. It also features 10-bit accuracy with a built-in voltage reference and an internal voltage reference of 0.08V with a temperature range of -40°C to +125°C. It also has a low noise floor of -95 dBFS and a high SNR of 76-83 dBFS.

The core of the MAX5152ACEE+T is an 8-bit parallel data bus + 2-bit command bus. The DAC has two selectable output gain options of 2.5V or 5V. The output voltage is obtained by multiplying the DAC’s 2.5V or 5V range with a 10-bit binary number. The DAC also features a power down mode and when in this mode, the output voltage is forced to 0V and the supply current is reduced to <0.1µA.

In terms of its working principles, the MAX5152ACEE+T utilizes a resistor-string architecture for digital to analogue conversion. When the data is loaded onto the DAC, the architecture calculates a resistance value based on the number of resistors in the string. This resistance is used to control the output voltage of the DAC. When the voltage level needs to be changed, the control input switches connecting different resistors together, thus reducing or increasing the output voltage.

The MAX5152ACEE+T is widely used in industrial and consumer applications. With its fast settling time, low power consumption, small size, and wide operating temperature, this DAC is perfect for applications where space, power, and accuracy are a concern.

The specific data is subject to PDF, and the above content is for reference