MAX5490VB10000+T

Number of Pins:	3
Height - Seated (Max):	0.044" (1.12mm)
Size / Dimension:	0.115" L x 0.051" W (2.92mm x 1.30mm)
Supplier Device Package:	SOT-23-3
Package / Case:	TO-236-3, SC-59, SOT-23-3
Mounting Type:	Surface Mount
Applications:	Voltage Divider (TCR Matched)
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±35ppm/°C
Power Per Element:	67.2mW
Series:	MAX5490
Resistor-Ratio-Drift:	±1 ppm/°C
Resistor Matching Ratio:	±0.05%
Number of Resistors:	2
Tolerance:	--
Resistance (Ohms):	9.091k, 90.91k
Circuit Type:	Voltage Divider
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, ArraysThe MAX5490VB10000+T is an integrated resistor networks widely used in many applications. It consists of 16 independent single in line resistors packaged together in a common housing. Each resistor has a fixed resistance value and is connected in series with the other resistors.The main purpose of the MAX5490VB10000+T network is to provide a convenient output impedance match for any circuit where the input signal needs to be matched with the device output impedance. This is especially important in communication systems, since it helps to reduce distortion and improve signal integrity. The network can also be used to balance the input and output impedances of transceivers.The network consists of 16 different resistances, which are separated into two groups of 8 resistances each. Both series and parallel configurations are possible. For example, a series configuration of the resistors would produce a combined resistance value equal to the sum of the individual resistors, while a parallel configuration would produce a combined resistance value equal to the reciprocal of the sum of the individual resistors.The MAX5490VB10000+T network is also popular in digital signal-processing applications. It is useful for regulating the voltage levels of digital signals, allowing a high frequency signal to convert to a low frequency signal while maintaining the exact signal levels. This ensures accurate and reliable transmission of data over long distances.In addition, the MAX5490VB10000+T network can be used to match input signals from different sources with different impedances. To do this, the resistors can be configured in two parallel sub-networks consisting of 8 resistors each. The resistance of each sub-network can be adjusted in order to match the input impedance of the device being tested.Finally, the MAX5490VB10000+T network can also be used to reduce noise. By configuring the resistors in a series configuration, the network can act as a low-pass filter, reducing unwanted high-frequency noise and allowing the desired signals to pass through with minimal distortion. Similarly, the network can be used as a high-pass filter to reduce low-frequency noise.Overall, the MAX5490VB10000+T is a versatile resistor network that is suitable for many different applications. Its ability to provide an output impedance match, regulate voltage levels, and reduce noise makes it an ideal choice for a wide range of designs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description