MAX5942ACSE+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Over Ethernet (PoE) Controllers are electronic devices that allow the delivery of electrical power over an Ethernet cable. This type of power delivery is known as "power by wire", and has become a popular alternative to traditional power outlets since it enables the simultaneous transmission of data and power over the same network.

The MAX5942ACSE+ is a single-channel Power Over Ethernet controller IC that enables the remote powering of Ethernet-enabled devices such as IP cameras, VoIP phones, and access points. The device has an overall system power budget of up to 15.4W and supports both 802.3bt and IEEE802.3at PoE Standards. It includes various features such as automatic classification, under-voltage lockout (UVLO), over-voltage protection (OVP), short-circuit protection (SCP), over-temperature protection (OTP) and thermal cyclic shutdown.

The MAX5942ACSE+ operates according to an active pulse-width modulation (PWM) current-mode control scheme. It is designed to provide low noise and low ripple with its integrated current-mode converter topology and PWM control loop. It has a constant frequency of 250kHz, enabling optimum EMI performance and high power efficiency.

The MAX5942ACSE+ supports both two- and four-pair PoE configurations. When using two-pair PoE, it handles a maximum power budget of up to 25.5V/14.8W. When using four-pair PoE, it handles a maximum power budget of up to 51V/15.4W. This makes the device suitable for a wide range of PoE applications, from low-power IoT devices to high-power camera systems.

One of the key features of the MAX5942ACSE+ is its programmable advanced-level thermal and short-circuit protection. It features both advanced and basic levels of over-current protection, allowing for safe operation even in demanding conditions. This makes it an ideal choice for applications where the operating temperature range is restricted, such as running a TEC (thermoelectric cooler) or a cooled camera.

The MAX5942ACSE+ also supports IEEE 802.3at auto-classification, which enables the remote powering of powered devices that comply with the standard. It also supports Class 1, 2, and 3 power-source equipment (PSE) with a programmable signature. This ensures that the device is compliant with all of the latest PoE standards.

In addition, the MAX5942ACSE+ is designed to meet all of the safety requirements for PoE applications, which include isolation voltages up to 2,841V for Class 3 PSE devices and 2,177V for Class 1 and 2 PSE devices. Its integrated independent OVP stage also helps protect the system from excessive current draws and over-temperature conditions.

Overall, the MAX5942ACSE+ is an extremely reliable and robust single-channel Power Over Ethernet controller IC that is suitable for a broad range of PoE applications, from low-power IoT devices to high-power camera systems. Its integrated PWM current-mode control scheme, programmable thermal and short-circuit protection, and compliance with IEEE 802.3at auto-classification all make it a great choice for designers looking for an efficient and reliable PoE solution.

The specific data is subject to PDF, and the above content is for reference