MAX603CSA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX603CSA is a voltage regulator that falls under the Linear category of PMIC or Power Management ICs. This voltage regulator features a single low-dropout linear regulator whose output is adjustable from 1.2V to 7.0V and a 200mA low-dropout current capability. The regulator is offered in standard 8-pin SOIC and MSOP packages as well as in 5-pin SOT23 package.

The purpose of this voltage regulator is to provide a regulated output voltage from a single-supply, unregulated input voltage. This voltage regulator requires a minimum input voltage of 1.2V and operates with a maximum input voltage up to 7.0V. The output voltage can vary from 1.2V to 7.0V that is adjustable using one external resistor divider.

The MAX603CSA provides a low-dropout linear regulator that is enabled by the logic level at its enable pin. A logic HIGH (3.0V or higher) at the EN pin enables the regulator output, and a logic LOW disables the regulator. The regulator is in the disabled state at power-up.

The advantages of a Linear voltage regulator compared to its switched-mode counterparts are minimal output noise, no heat sink requirement, improved output voltage accuracy and a very low quiescent current. This makes them ideal for applications in which very low output noise and very high current are required. With the MAX603CSA, the quiescent current is only 5µA, making it suitable for portable battery-powered applications. Since it does not require a large heat sink, it can be used in space or height-critical applications.

In addition, the MAX603CSA is designed with high PSRR and low dropout voltage that is vital for handheld devices. It also features an over-temperature protection (OTP) function that automatically disables the device above specified ambient temperatures and then automatically re-enables it when the temperature declines.

The MAX603CSA has several application fields such as consumer electronic devices, tablet and smart phone applications, PDAs, Bluetooth headsets, MP3 players, digital cameras, and many other applications that require low-dropout regulators.

The MAX603CSA is also used in various industrial applications such as server power supplies, radio frequency (RF) power amplifiers, automotive applications, and automated test equipment. This voltage regulator can also be used in white goods, industrial control systems and active filter designs.

The operation of the MAX603CSA is regulated by an external voltage divider. The external resistor divider determines the output voltage. When the input voltage reaches the set output voltage, the regulator enters dropout mode. The power switch then turns on, allowing the output voltage to reduce until the voltage drop reaches approximately 0.4V.

The MAX603CSA offers low power dissipation, output noise and high power supply regulation over temperature. With the combination of these features, the MAX603CSA can provide a efficient and accurate voltage regulation to meet the demands of the application.

The specific data is subject to PDF, and the above content is for reference