MAX6165AESA+T

Noise - 0.1Hz to 10Hz:	60µVp-p
Base Part Number:	MAX6165
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C (TA)
Current - Supply:	120µA
Voltage - Input:	5.2 V ~ 12.6 V
Noise - 10Hz to 10kHz:	60µVrms
Series:	--
Temperature Coefficient:	5ppm/°C
Tolerance:	±0.04%
Current - Output:	5mA
Voltage - Output (Min/Fixed):	5V
Output Type:	Fixed
Reference Type:	Series
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The MAX6165AESA+T is widely used in PMIC (Power Management Integrated Circuits) circuit designs and application fields due to its ultra-stable voltage reference and long-term performance. The MAX6165AESA+T is a two-pin precision low-dropout (LDO) device that provides a good performance over temperature, supply voltage, and time. It is widely used in critical power supply applications such as portable medical device, tracking data acquisition, end products, and embedded control systems.

Applications

The MAX6165AESA+T is specifically designed for portable medical device and tracking data acquisition, providing low output voltage regulation with high precision and accuracy. It is used in applications that require low power dissipation and where high accuracy, stability and wide line regulation are needed. Lots of applications makes use of the MAX6165AESA+T, such as cellular phones, GPS, watches, timing clocks, and other battery systems. The MAX6165AESA+T offers a wide 3V to 10V input voltage range, with a low dropout voltage of 0.9V at 1A and 0.6V at 100mA. It provides a maximum output current of 1A, with a preset low output voltage reference range of 0.8V to 3V. It is available in an SOT-23-5 small temperature compensators package for better thermal performance.

Working Principle

The basic operating principle of MAX6165AESA+T is that it regulates the input voltage and output current through the external voltage regulator circuit. It is designed to ensure that the output voltage is a constant and highly accurate reference that does not depend on the input voltage or temperature variations, as well as current loads. When the input voltage is greater than the desired output voltage, the MAX6165AESA+T uses the extra voltage to generate the right output voltage. It uses an external feedback circuit to compare the output voltage with a reference signal. The difference signal is then amplified and the resulting voltage is used to control the LDO.

Conclusion

The MAX6165AESA+T is a versatile and reliable low-dropout voltage reference device. It offers a wide 3V to 10V input voltage range and a wide output reference range of 0.8V to 3V while providing very high precision and accuracy over temperature and line variations. Its small size and low noise make it perfect for use in portable medical device, tracking data acquisition and embedded control systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description