MAX619CSA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX619CSA is a monolithic CMOS switched capacitor voltage regulator and power supply supervisor IC. It provides the function of two independent voltage regulators, one of which is a low-noise switched capacitor voltage regulator, and the other is a voltage supervisor. The MAX619CSA integrated circuit (IC) is a DC-DC switching regulator with low dropout, providing low noise and efficiency while maintaining a wide input and output voltage range.

The MAX619CSA has an internal power MOSFET, which is suitable for a wide range of input supply voltages. The maximum input voltage is 40V (maximum guaranteed), and the output voltage can be 1.23V with an output current of 1A. The output voltage range is from 0.9V to 1.23V. The load transient response time is 4µs at no load.

The MAX619CSA DC-DC converter is set up with a range of protections, such as overvoltage (OVP) and undervoltage (UVP) protection, overcurrent protection (OCP), and thermally stable temperature protection (TSP). The OVP and OCP limits are programmable, with an accuracy of ±2%. The UVP threshold is normally set at 0.7V.

The MAX619CSA DC-DC switching regulator is a synchronous buck converter. The buck converter works by adjusting the duty cycle of the switch to control the output voltage and current. When the switch is on or “closed”, the input voltage is applied to the output. When the switch is off or “open”, the output voltage is decoupled from the input voltage. This is used to control the output voltage and current. In addition, the switch is also used to feed back current from the output to the input. This feedback current is used to regulate the output voltage. The MAX619CSA also incorporates a low noise switched capacitor voltage regulator.

The MAX619CSA switched capacitor voltage regulator works by alternately charging two capacitors with the same value. The first capacitor is connected to the output and the second capacitor is connected to the input through a diode. When the switch is in the “off” state, the second capacitor charges with the input voltage. When the switch is in the “on” state, the first capacitor is charged from the input voltage and then discharged into the output. By alternating the charging and discharging of the capacitors, the output voltage is regulated.

The MAX619CSA has a power supply supervisor that allows the device to detect specific input supply voltages and then assert a logic-level signal. The MAX619CSA is designed for repeat accuracy over a wide temperature range and is stable with simple external components. In addition, the MAX619CSA has added features such as a power-on reset (POR) and a power-down lockout (PDL) that can be used to ensure safe supply start-up and power-down.

The MAX619CSA application field includes a variety of industrial, telecom, automotive, and space applications. It is especially suitable for system settings and power supply supervision applications such as stepper motor drivers and microprocessor systems. Its high efficiency, low noise, and low dropout voltage make it an efficient way to power a variety of microelectronic systems.

The MAX619CSA voltage regulator and power supply supervisor IC is an effective and reliable DC-DC switching voltage regulator for a variety of applications. Its wide input and output voltage range, low noise and efficiency, and integrated protection features make it ideal for a variety of industrial, telecom, automotive, and space applications. The integrated switched capacitor voltage regulator is also useful for regulating power supply noise, making the MAX619CSA an effective choice for a number of microelectronic applications.

The specific data is subject to PDF, and the above content is for reference