MAX6706ASKA+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power management integrated circuits (PMICs)are a category of integrated circuits (ICs) used to manage an electronic device\'s or system\'s power consumption. Supervisors, a specific type of PMIC, are composed of a voltage reference, an oscillator, window comparators, and a reset logic block. Supervisors are used to protect the system from unpredictable conditions such as power cycling, brownouts, or input voltage fluctuations that can cause malfunctioning. The MAX6706ASKA+ is a low-cost, low-power supervisor from Maxim Integrated that is used to protect a system\'s power supply from undervoltage conditions.

The MAX6706ASKA+ is a single-supply 3.3V supervisor with an active-low reset output. It is rated for extended temperatures of -40°C to +85°C. It contains a low-current precision voltage reference (VREF), three window comparators, an oscillator, and a reset logic block. The VREF is a bandgap reference with an output voltage of 1.25V ±10mV, and is used to generate a reference voltage for the window comparators. The oscillator is a voltage-controlled oscillator (VCO) with an adjustable slew rate and is used to vary the frequency of the reset output.

The MAX6706ASKA+ has three window comparators, one for the undervoltage monitor, one for the overclocking monitor, and one for the power-on-reset (POR) function. The undervoltage comparator sets a window of 1.20V to 2.60V (1.25V ±0.25V, 1.25V respectively) and provides an active-low reset output when the input voltage falls below the lower threshold. The overclocking comparator has a window of 1.60V to 4.20V (1.25V ±0.50V, 1.25V respectively). The POR comparator has a window of 2.40V to 3.60V (1.25V ±0.50V, 1.25V respectively) and provides an active-low reset output when powered on or after a power cycle.

The reset output signal of the MAX6706ASKA+ is a watch-dog timer signal. It is generated by the oscillator with an adjustable timeout period from 4.8ms to 128s. The reset output can be set for either pulse or toggle mode. The pulse mode provides an active-low reset signal with a width of 100ms regardless of the timeout period, while the toggle mode sets the reset signal output width to the timeout period value. If a fault occurs, the reset signal is held low until a valid power supply is restored.

The MAX6706ASKA+ is used in various applications such as automotive (in-vehicle network applications, power supply protection, etc.), industrial (sensor networks, power supply protection, etc.), lighting (street lighting, LED drivers, etc.), and consumer electronic gadgets. It is designed to monitor the input voltage of the system, providing an early warning when the voltage falls below a certain threshold. It is also used to provide a reset signal when the system needs to be reset, or to provide power-on-reset signals when the system is powered on. The MAX6706ASKA+ also provides protection against overvoltage and voltage transients.

In conclusion, the MAX6706ASKA+ is an ideal solution for regulating and protecting a system’s power supply. Its versatile features and extended temperature range make it suitable for a wide range of applications. With its low power consumption and cost-effective design, the MAX6706ASKA+ is well suited for use in many power management applications.

The specific data is subject to PDF, and the above content is for reference